Sea Hawk Tuff Stuff White Epoxy Primer

Sea Hawk Tuff Stuff White Epoxy Primer

Sea Hawk's Tuff Stuff High Build Epoxy Primer dries fast and is able to complete a barrier system and bottom paint in just two days. Microsheet silicate technology allows the epoxy to build a 100% water barrier that protects the surface from water penetration and moisture. Can be used on aluminum, bronze, stainless steel, cast iron, and lead both above and below the waterline. Effective on fiberglass or bilge coating as it helps prevent blisters and is resistant to oil and water. A universal primer it can be used for corrosion protection and for priming metal. The overlapping barrier created by Tuff Stuff prevents any direct path for water migration.

• Typical Film Thickness (sprayer): 6-7.5 mils dry film thickness per coat. (11.5-14.5 mils wet film thickness for smoother finish
• Typical Film Thickness (Roller): 3.6-4.2 mils dry film thickness per coat. (7.0-8.0) mils wet film thickness for smoother finish
• Recommended Coats: 2-4 depending on intended service

Features:

• Reduces labor and less haul out time
• High Build Epoxy - Fewer coats needed
• Protects metals from corrosion above and below waterline
• Use over blistered fiberglass as a repair coat or a barrier coat over unblistered fiberglass
• Longer window between coats makes Tuff Stuff easy to use
• Easy 1:1 mixing formula makes it efficient to use for jobs of all sizes
• Sag resistance prevents runs during application

Click here to download Sea Hawk Tuff Stuff Safety Data Sheet

Tuff Stuff Application Video

Frequently Asked Questions

What is Sea Hawk Tuff Stuff White Epoxy Primer used for?

Sea Hawk Tuff Stuff White Epoxy Primer is a high-build epoxy primer designed to create a water barrier that helps protect surfaces from water penetration and moisture. It can be used for corrosion protection and metal priming, as well as on fiberglass or bilge coatings as a repair or barrier coat.

What materials can Sea Hawk Tuff Stuff White Epoxy Primer be used on?

Sea Hawk Tuff Stuff White Epoxy Primer can be used on aluminum, bronze, stainless steel, cast iron, and lead above and below the waterline. The product description also identifies fiberglass and bilge coating applications, including use over blistered fiberglass as a repair coat or unblistered fiberglass as a barrier coat.

How many coats of Sea Hawk Tuff Stuff White Epoxy Primer are recommended?

The recommended number of coats is 2-4, depending on the intended service. The product is formulated as a high-build epoxy primer, allowing fewer coats to achieve the desired protection compared with a lower-build application.

What film thickness can Sea Hawk Tuff Stuff White Epoxy Primer achieve?

When applied by sprayer, the typical dry film thickness is 6-7.5 mils per coat, with a wet film thickness of 11.5-14.5 mils for a smoother finish. With a roller, the typical dry film thickness is 3.6-4.2 mils per coat and the wet film thickness is 7.0-8.0 mils.

Can Sea Hawk Tuff Stuff White Epoxy Primer be used above and below the waterline?

Yes. The product description specifies that Tuff Stuff can be used on aluminum, bronze, stainless steel, cast iron, and lead both above and below the waterline. It is also described for corrosion protection of metals in these applications.

How is Sea Hawk Tuff Stuff White Epoxy Primer mixed?

Sea Hawk Tuff Stuff White Epoxy Primer uses an easy 1:1 mixing formula. The product description identifies this mixing ratio as an efficiency benefit for jobs of different sizes. Follow the product label for complete mixing and application instructions.

California Residents: WARNING Cancer and Reproductive Harm - P65Warnings.ca.gov