Trailer Bunk Galvanized Swivel Brackets

Trailer Bunk Galvanized Swivel Brackets

Hot-Dipped Galvanized Swivel Top Bunk Brackets are common on smaller boat trailers that require not only height adjustment of the bunk boards but also angle adjustment to accommodate the boat hull design. These trailer bunk swivel brackets are hot-dipped galvanized for maximum corrosion resistance. To complete their installation, you will also need lag screws to reinstall the new bunk board brackets and bunk boards. Also be aware that these swivel bunk brackets typically install using either standard bolts or U-bolts that are mounted to the trailer's crossmember. For DIYers and marine technicians alike, it’s best to know the dimension of your trailer's crossmember. This way, you’ll know which U-bolt size you require for mounting your replacement bunk board brackets.

Trailer Bunk Galvanized Swivel Brackets are designed for use with bolster brackets. Trailer bunk galvanized swivel brackets allow trailer bunk and bolster boards to be easily adjusted to exactly match the angle of your boat's hull bottom. Remember, since they are galvanized for protection from the elements, your new bunk board brackets will provide years of reliable service. The brackets include zinc-plated nuts and bolts to secure the brackets. To recap, these bunk board brackets are:

• Hot dipped galvanized finish provides corrosion protection
• Sold as pair

Dimensions:

• Mounting Face (3 Holes): 1-1/4" long
• Swivel Face (1 Bolt Hole): 1-3/4" long
• Overall Bracket Width: 3-1/2"
• Thickness: 3/32"

Frequently Asked Questions

What are Trailer Bunk Galvanized Swivel Brackets used for?

Trailer Bunk Galvanized Swivel Brackets are designed for use with bolster brackets on boat trailers. They allow bunk and bolster boards to be adjusted for both height and angle, helping accommodate the angle of the boat hull bottom.

Can Trailer Bunk Galvanized Swivel Brackets adjust to the angle of a boat hull?

Yes. These swivel brackets allow trailer bunk and bolster boards to be adjusted to match the angle of the boat hull bottom. The swivel design provides angle adjustment in addition to the height adjustment available from the trailer bracket installation.

What finish do the Trailer Bunk Galvanized Swivel Brackets have?

The Trailer Bunk Galvanized Swivel Brackets feature a hot-dipped galvanized finish designed to provide corrosion protection. This finish is intended to help the brackets withstand exposure to the elements during marine trailer use.

What hardware is included with the Trailer Bunk Galvanized Swivel Brackets?

The brackets include zinc-plated nuts and bolts for securing the brackets. The installation also requires lag screws to reinstall the bunk boards. Depending on the trailer crossmember, standard bolts or U-bolts may be used for mounting.

What are the dimensions of the Trailer Bunk Galvanized Swivel Brackets?

The mounting face with three holes is 1-1/4 inches long, while the swivel face with one bolt hole is 1-3/4 inches long. The overall bracket width is 3-1/2 inches and the bracket thickness is 3/32 inch.

How are Trailer Bunk Galvanized Swivel Brackets sold?

Trailer Bunk Galvanized Swivel Brackets are sold as a pair. Before installation, check the dimensions of your trailer's crossmember to determine the appropriate mounting hardware, such as standard bolts or U-bolts.

California Residents: WARNING Cancer and Reproductive Harm - P65Warnings.ca.gov