Turning Point 506 Hub KitThe Turning Point 506 Hub Kit connects a compatible Turning Point propeller to the propeller shaft on the engine applications listed below. Confirm the engine manufacturer,...
Total Price:
Add to CartThe Turning Point 504 Hub Kit connects a compatible Turning Point propeller to the propeller shaft on the engine applications listed below. Confirm the engine manufacturer, model, year, spline count, and gearcase size before ordering; horsepower alone does not establish fitment.
Match every applicable specification in the chart to your engine and propeller setup before purchasing.
| Manufacturer | Engine Model | Notes | Stroke/Cycle | Years | Hub Kit | Spline | Gearcase |
|---|---|---|---|---|---|---|---|
| Volvo Penta SX & OMC SX Cobra | 3.0L - 8.2L | Not available for Volvo DuoProp or Aquamatic drives | 1994 & Newer | 504 | 15 | 4.25" | |
| Yamaha | 150 - 250HP | 2 & 4 | 504 | 15 | 4.25" | ||
| Yamaha | Stern drives 3.0 - 7.4L | 504 | 15 | 4.25" |
Match your engine manufacturer, model, stroke or cycle, year, spline count, and gearcase size to the application chart. Do not select a hub kit by horsepower alone.
No. Fitment is limited to the specific applications shown in the chart. Similar-horsepower engines can use different spline counts, gearcase sizes, or hub kits.
Yes. The hub kit must match the engine propeller shaft and gearcase application as well as the compatible Turning Point propeller hub system.
For compatible 4.25-inch and 4.75-inch gearcase applications, the Turning Point 500 Series hub system is interchangeable with Mercury Flo-Torq II, Michigan Wheel XHS, and Solas Rubex hub systems. Always confirm the complete application before ordering.
Use Wholesale Marine's Propeller Finder to narrow down compatible propeller options for your boat and engine.
California Residents:
WARNING
Cancer and Reproductive Harm -
P65Warnings.ca.gov