Total Price:
Add to CartSold in gallons
Interlux Nautical ProGuard Ablative is performance, value and reliability all in one. ProGuard Ablative is an all-purpose, low V.O.C. antifouling paint formulated to erode away with use reducing paint build-up. ProGuard Ablative provides season-long protection in moderate to high fouling waters and can be applied directly over most properly prepared antifouling paints. Recommended for use on the underwater areas of fiberglass, wood, and properly primed metal (except aluminum) boat hulls and can be used in fresh, salt and brackish waters.
Specifications:
Do not use on aluminum
***WILL SHIP GROUND ONLY TO THE CONTIGUOUS 48 STATES ONLY***
APPLICATION DATA METHOD: Airless Spray, Brush, Conventional Spray, Roller
NUMBER OF COATS: 2, 3 on bare wood
DRY FILM THICKNESS PER COAT: 2 mils (3.6 mils wet)
COVERAGE: 455 sq. ft/gal.
APPLICATION TEMP: 41°F Min. / 95°F Max.
THINNER: Thin 10% wuth Xylene. Do not exceed 10 % by volume.
| Temp | To Touch | To Recoat | To Launch |
| 95°F | 1 HR | 8 HR | 8 HR |
| 73°F | 2 HR | 12 HR | 12 HR |
| 50°F | 3 HR | 16 HR | 16 HR |
PREVIOUSLY PAINTED SURFACES - GOOD CONDITION: Remove all traces of loose paint by sanding the entire surface with 80 grit wet-or-dry sandpaper; wipe surface clean with Xylene¹ using the two-rag method before and after sanding. Apply two coats of ProGuard Ablative allowing for appropriate dry times.
PREVIOUSLY PAINTED SURFACES - POOR CONDITION: Completely remove old antifouling paint, after all old antifouling paint has been completely removed, sanding the entire surface with 80 grit wet-or-dry sandpaper; wipe surface clean with Xylene¹ using the two-rag method before and after sanding. Apply two coats of ProGuard Ablative allowing for appropriate dry times.
BARE FIBERGLASS: scrub the surface thoroughly with a stiff brush using soap and water. Flush with fresh water to remove the soap residue and allow surface to dry. Remove mold release wax and surface contamination by wiping down the surface with Xylene¹ using the two-rag method. Fill any surface imperfections with approved filler for underwater use. Sand the entire surface with 80-grit sandpaper until a flat matte finish is obtained. Wipe the sanding residue off the surface with Xylene¹ using the two-rag method. Apply two coats of ProGuard Ablative allowing for appropriate dry times.
BARE WOOD: Sand the entire surface with 80 grit wet-or-dry sandpaper; wipe surface clean with Xylene¹ using the two-rag method before and after sanding. Apply the first coat of ProGuard Ablative thinned 10% with Xylene². Apply two finish coats of ProGuard Ablative allowing for appropriate dry times
UNDERWATER METALS: Apply an approved underwater metal primer as per manufacturer’s instructions. Apply two coats of ProGuard Ablative allowing for appropriate dry times. Do not use on aluminum
APPLICATION METHODS:
California Residents: 
WARNING
Cancer and Reproductive Harm -
P65Warnings.ca.gov
Other Details
Interlux ACT Ablative Antifouling Bottom Paint Keep your hull clean and protected with Interlux ACT, a trusted choice for boaters seeking long-lasting antifouling performance. This Interlux ablative...
Choose Options
Interlux Aqua One Ablative Antifouling Paint Interlux is a leading manufacturer of antifouling paint and has been protecting boats with their complete line of protective paints for over a century...
Choose Options
Interlux Pacifica Plus Antifouling Marine Paint with Biolux Interlux Pacifica antifouling paint is specially designed to battle slime and contains Econea to help ward off barnacles, algae, and other...
Choose Options
Interlux Micron CSC Antifouling Bottom Paint Stay ahead of marine growth with Interlux Micron CSC, a premium self-polishing antifouling paint designed for long-last
Choose Options
Interlux VC Offshore Antifouling Boat Bottom Paint Formulated for high-performance boats, Interlux VC Offshore Antifouling Bottom Paint delivers a smooth, ultra-durable finish that resists fouling...
Choose Options
Interlux Micron Extra SPC Antifouling Paint Interlux is known for its high-quality antifouling paints that have been manufactured using only superior ingredients and developed for long-lasting...
Choose Options
