Interlux Micron 66 Antifouling Boat Bottom Paint
Interlux Micron 66 Antifouling Boat Bottom Paint
The top rated Interlux Micron 66 is formulated to provide a level of anti-fouling protection not previously available in any paint. Micron 66 provides the best anti-fouling performance in the harshest fouling conditions for 2 YEARS and beyond. Over time Micron 66 polishes and becomes smoother with usage, reducing your boats drag , fuel consumption, and minimizes sanding time during reapplications. Micron 66 is designed for professional application and is ideal for use on all sizes of boats including super yachts.
NOT FOR FRESH WATER USE
- Best antifouling performance in the harshest fouling conditions for 2 years and beyond
- Outperforms old TBT antifouling paints
- Top rated antifouling in independent tests for maximum protection and long life
- Formulated specifically for professional application
- Maximum protection even during stationary periods at the dock or mooring
- Perfect for Fiberglass, Wood and properly primed underwater Metal
- Long lasting Self Polishing Copolymer with Biolux
Sold in gallons only.
Interlux Spray Thinner: For thinning and cleaning
Interlux Brush-Ease: For thinning and cleaning
Available in 4 colors:
- Black (ILX-YBA-473)
- Blue (ILX-YBA-470)
- Green (ILX-YBA-471)
- Red (ILX-YBA-472)
Why Micron technology?
Micron Technology is the basis of all Micron bottom paints and the formulations are second to none. Micron Technology was first introduced to the industry in the early 80's and has evolved into the class leading antifouling paints.
- Longest lasting, multi-season ability to haul and re-launch without repainting
- Controlled polishing like a bar of soap reduces paint build up, eliminating the need for sanding
- Micron Technology polishes to a smoother surface than hard antifoulings - maximizing fuel savings
- Unlike old fashion high copper bottom paints, Micron uses less copper more efficiently for longest lasting antifouling protection
***WILL SHIP GROUND ONLY TO THE CONTIGUOUS 48 STATES ONLY***
How To Apply
APPLICATION DATA METHOD: Airless Spray, Brush, Conventional Spray, Roller
NUMBER OF COATS: 3
DRY FILM THICKNESS PER COAT: 2 mils (5.2 wet mils)
COVERAGE: 320 sq. ft/gal.
APPLICATION TEMP: 41° F. Min. / 95°F. Max.
THINNER: Special Thinner 216 or Brush-Ease 433
|Temp||To Touch||To Recoat||To Launch|
|95°F||1/2 HR||4 HR||12 HR|
|73°F||1/2 HR||6 HR||12 HR|
|59°F||2 HR||8 HR||18 HR|
PREVIOUSLY PAINTED SURFACES: In Good Condition TBT Copolymers Wet sand or vacuum sand surface with 80 grade (grit) paper to a clean firmly attached surface. Clean with Special Thinner 216. Prime with Primocon or TBT Sealer. Non-TBT Copolymers Wet sand or vacuum sand surface with 80 grade (grit) paper to a clean firmly attached surface. Clean with Special Thinner 216. Hard Antifoulings Wet sand or vacuum sand surface with 80 grade (grit) paper to a clean firmly attached surface. Clean with Special Thinner 216. Prime with Primocon or TBT Sealer. In Poor Condition Use Interstrip to remove all traces of antifouling. Sand and remove sanding residue.
BARE FIBERGLASS: (POLYESTER OR VINYLESTER) Clean and degrease with Fiberglass Solvent Wash 202 or use Fiberglass Surface Prep. Sanding System - Sand with 80 grade (grit) paper. Remove sanding residue. Repair defects with Watertite, then sand and wipe clean.
BARE WOOD: Sand with 80 grade (grit) paper. Clean with Special Thinner 216. Apply first coat reduced 10% with Special Thinner 216 or Brush-Ease 433. Fill seams, if necessary, with Seam Compound Brown 30. Repair defects with Watertite, then sand and wipe clean. Apply 2 additional coats.
STEEL HULLS: Contact the Interlux Technical Service Department at 1-800-468-7589 for full information on how to properly prime underwater metals.
UNDERWATER METAL PARTS: Contact the Interlux Technical Service Department at 1-800-468-7589 for full information on how to properly prime underwater metals.
DO NOT USE THIS PRODUCT IN FRESH WATER
APPLICATION INFORMATION: At least 2 coats should be applied. For ultimate performance apply a total of 6 mils dry film thickness to avoid premature polish through. This may be achieved in 2 coats by spray and 3 coats by roller. Apply an extra stripe coat in areas of high wear such as chines, rudders, sterngear and any leading edges. Airless Spray Spraying can be done using the correct safety and spray equipment. Contact Interlux Technical Service for more information. Conventional Spray Spraying can be done using the correct safety and spray equipment. Contact Interlux Technical Service for more information. Surface must be dry and clean, and free from grease, detaching paint etc. Micron® 66®* can be applied to most popular antifouling paints as long as the old coating has been aged, is tightly adhered and is in sound condition. Do not apply Micron® 66®* over aluminum. Use TBT Sealer as a conversion coat prior to application over tin-based copolymer antifouling paints.
Customers also viewed