Boat Trailer 3" Bunk Slick 10 piece

Boat Trailer Bunk Slick Kit, 10 piece

Features: 

• Bolts directly onto carpeted bunk boards
• Fits 2x6 standard bunk boards
• Slide on or off with less effort
• Easy to install
• 10 Pieces 3" X 16"

Bunk Slicks Installation Instructions for #86170 & #86164

1. With the boat on the trailer, determine the forward most point where the boat makes contact with the bunks. 
2. Unload boat from the trailer. 
3. Place Bunk Slick centered on the rear end of bunk so that the bunk slick is even with the end of the carpeted bunk. 
4. Space Bunk Slicks on carpeted bunk and space evenly with no more than 4 inches between each Bunk Slick. 
5. Area to be "covered" is from the rear end of the carpeted bunk to 5 inches past the most forward point where the boat hull comes in contact with the carpeted bunk (below). 
6. Using the screws provided, attached the Bunk Slicks to the carpeted bunks.

Frequently Asked Questions

What is the Boat Trailer Bunk Slick Kit designed for?

The Boat Trailer Bunk Slick Kit is designed to make loading and unloading a boat easier by allowing it to slide on or off carpeted trailer bunks with less effort. The slicks bolt directly onto the carpeted bunk boards and are designed to fit standard 2x6 bunk boards.

What size bunk boards do these boat trailer bunk slicks fit?

These bunk slicks are designed to fit standard 2x6 bunk boards. Each piece measures 3" x 16" and bolts directly onto the carpeted bunk board using the screws provided.

How many pieces are included in the Boat Trailer Bunk Slick Kit?

The kit includes 10 bunk slicks, with each piece measuring 3" x 16". The slicks are spaced along the carpeted bunk boards to cover the area where the boat hull contacts the bunks.

How should the Boat Trailer Bunk Slicks be positioned on the trailer bunks?

Place the first bunk slick centered at the rear end of the carpeted bunk, even with the end of the bunk. Space the remaining slicks evenly with no more than 4 inches between each piece. The covered area should extend from the rear of the bunk to 5 inches past the forward-most hull contact point.

Are screws included with the Boat Trailer Bunk Slick Kit?

Yes. The installation instructions specify using the screws provided to attach the bunk slicks to the carpeted bunk boards. The product is designed for easy installation directly onto the carpeted bunks.

Do I need to unload the boat before installing the bunk slicks?

Yes. The installation instructions first have you determine the forward-most point where the boat contacts the bunks while the boat is on the trailer. The boat should then be unloaded before positioning and attaching the bunk slicks to the carpeted bunk boards.

California Residents: WARNING Cancer and Reproductive Harm - P65Warnings.ca.gov