Bennett M80 Complete Sport 8" x 10" Hydraulic Trim Tab Kit

Bennett M80 Complete Sport 8" x 10" Hydraulic Trim Tab Kit

Bennett Sport Trim Tabs help your boat get on the plane fast and stay on the plane at intermediate speeds. By staying on the plane longer, your boat will have increased fuel efficiency and speed. If you find one side of your boat being weighed down more than the other, these sport trim tabs can correct uneven loads by providing lift on the opposite side. All Bennett Trim Tabs are easy to install and service, and will require minimal maintenance during their lifespan.

This Trim Tab Kit includes two hydraulic actuators. Bennett trim tab actuators are strong, flexible nylon/fiberglass hydraulic cylinders that push the trim tabs into position. All hydraulic lines and wires for the actuator are internal (concealed by the upper hinge), so they're not exposed to harsh environments.

Bennett Sport Trim Tabs are recommended for use on: flat boats, center consoles, trailered boats, cuddy cabins, dual consoles, deck boats, bowriders, bass boats, walkarounds, runabouts & ribs, and cruisers. 

Benefits:

• Increase speed
• Improve visibility and safety
• Improve fuel efficiency
• 5 Year No-Hassle Warranty

Trim Tab Kit Options:

• M80
• 8" Wide x 10" Deep Trim Tabs
• For boats 17-20 ft.

Trim Tab Kits Include:

• (2) Trim Plane Assemblies
• (2) A1200SRC Hydraulic Trim Tab Actuators
• (1) V351HPU1 Hydraulic Power Unit
• (1) Euro Style Rocker Control Unit including wiring
• (1) Hardware Bag
• (1) 20' Hydraulic tubing

 Click to Download Bennett M80 Sport Hydraulic Trim Tabs Installation Instructions

Frequently Asked Questions

What is the Bennett M80 Complete Sport 8" x 10" Hydraulic Trim Tab Kit designed for?

The Bennett M80 Sport Trim Tab Kit is designed for boats 17 to 20 feet long. The 8-inch-wide by 10-inch-deep trim tabs are recommended for flat boats, center consoles, trailered boats, cuddy cabins, dual consoles, deck boats, bowriders, bass boats, walkarounds, runabouts, RIBs, and cruisers.

What are the benefits of the Bennett M80 Sport Trim Tabs?

Bennett Sport Trim Tabs help a boat get on plane quickly and stay on plane at intermediate speeds. They can help increase speed and fuel efficiency, improve visibility and safety, and provide lift to help correct uneven loads when one side of the boat is weighed down more than the other.

What is included with the Bennett M80 Complete Sport Trim Tab Kit?

The Bennett M80 kit includes two trim plane assemblies, two A1200SRC hydraulic trim tab actuators, one V351HPU1 hydraulic power unit, one Euro Style Rocker Control Unit with wiring, one hardware bag, and 20 feet of hydraulic tubing.

How do the hydraulic actuators on the Bennett M80 Trim Tab Kit work?

The kit uses two A1200SRC hydraulic trim tab actuators. These actuators are nylon/fiberglass hydraulic cylinders that push the trim tabs into position. The hydraulic lines and actuator wires are routed internally and concealed by the upper hinge, keeping them from exposure to harsh environments.

What size trim tabs are included in the Bennett M80 kit?

The Bennett M80 includes 8-inch-wide by 10-inch-deep trim tabs. This M80 configuration is specified for boats 17 to 20 feet in length.

What warranty does the Bennett M80 Sport Trim Tab Kit include?

The Bennett M80 Sport Trim Tab Kit includes a five-year no-hassle warranty. Bennett Sport Trim Tabs are also designed for easy installation and service with minimal maintenance during their lifespan.

California Residents: WARNING Cancer and Reproductive Harm - P65Warnings.ca.gov