Switches & Panels

Sea Dog Five Toggle Switch Panel with Power Socket Sea Dog offers a Water Resistant Toggle Switch panel in a matte black finish that looks good on any boat. Features five injection molded ABS switches and inline fuse holders. the panel is rated at 15...

Sea Dog Marine Battery Switch with Knob On-Off Made with Injection Molded Nylon and Machined Brass.  Specifications for On/Off (S-D-422761-1) Width: 2-3/4" Depth: 2-3/4" Length: 3" Volts: 48 DC Amps: 300

Blue Sea Water Resistant Circuit Breaker Panel - 6 Position This Blue Sea Circuit Breaker Panel is designed for flybridge and open cockpit applications. This water resistant panel will withstand water exposure normally encountered in above deck...

Sea Dog Rocker Switch Center Mounting Bracket The Sea Dog Rocker Switch Center Mounting Bracket is made of durable injected molded nylon and looks good on any boat.

Blue Sea Systems ST Blade Fuse Block - 6 Independent Circuits w/ Cover Corrosion resistant, tin-plated copper fuse clips reduce heat and improve the efficiency of the electrical system Clear insulating cover with label recesses accepts Small Format...

Sierra MP39100 5 Terminal Ignition Switch Key Features: Maximum corrosion protection Inner seal between contact plate and cylinder lock Non-conductive housing prevents potential shorts Additional Details: Back Up Nut: Brass Face Nut: Hex...

Blue Sea Systems ST Blade Fuse Block w/ Cover - 6 Circuit The Blue Sea ST Blade Fuse Block consolidates branch circuits and in-line fuses. This fuse block can be used withj 24-hour circuits and has a positive distribution bus with #10-32 stud. Includes...

The ADD-A-BATTERY is as simple to operate as an ON-OFF switch, yet effectively manages the switching and charging of two batteries from a single charge source The Add-A-Battery includes a Dual Circuit Plus™ Battery Switch and an Automatic Charging...

Blue Sea In-Line ATO/ATC Fuse Holder The Blue Sea In-Line Fuse Holder is for use with ATO or ATC fuses. Features: Supplied with 12 AWG pigtails 30A maximum fuse amperage Fuses sold separately

Blue Sea Water Resistant Circuit Breaker Panel - 4 Position This Blue Sea Circuit Breaker Panel is designed for flybridge and open cockpit applications. Panel will withstand the water exposures normally encountered in above deck applications such as...

Rocker switch mounting bracket end piece only. Center piece and cover not included.

Blue Sea Systems Busbar - 4 Stud 150 Amp The industry standard busbar for positive distribution The industry standard busbar for the collection of negative or AC ground circuits Specifications: Maximum Voltage: 300V AC 48V DC Number of...

Blue Sea Contura Mounting Panel Plug Features: Suitable for use with Contura Switch Mounting Panel

Blue Sea Systems m-Series Mini Dual Circuit Plus Battery Switch The m-Series Mini Dual Circuit Plus Battery Switch simultaneously switches two isolated battery banks or combines battery banks to all loads. The make before break contact design allows for...

Blue Sea Systems Stud Terminal Features: 4 x 3/8-16 Stud Terminal CE Certified

Blue Sea 6 Circuit Terminal Block The Blue Sea Systems Terminal Block features a closed black design that completely insulates power from the mounting surface. Each screw pair is one isolated circuit Jumpers allow creation of common...

Blue Sea Systems ANL 300 Fuse Block with Cover Features: Fuse Not Included Insulating cover satisfies ABYC/USCG requirements and cover breakouts allow access in any direction For use on systems up to 32 Volts DC Large 5/16"-18 studs accept 5/16"...

When pushed in all the way, the switch is turned off. When pulled to the first stop, the first circuit is activated. At the second stop the first circuit is deactivated and the second circuit is activated. 420410(-1) Off / Circuit 1(Anchor) Circuit...

Blue Sea Systems Waterproof In-Line AGC/MDL Fuse Holder Accepts 12-16 AWG wire 30A Maximum fuse amperage For use with AGC Or MDL glass fuses Fuse sold separately

Blue Sea Dual USB Accessory Panel w/ Socket This Blue Sea Dual USB Accessory Panel w/ Socket features a 12-volt socket and a 2.1A dual USB charger. The polycarbonate/ABS panel face is corrosion resistant, UV-stabilized and flame retardant...