Danforth Fluke Anchor

Standard Galvanized Danforth Fluke Anchor

Danforth fluke anchors deliver proven holding power through their distinctive two-fluke design set at a 32-degree angle. Manufactured in the USA from high tensile 4130 steel with galvanized coating, these anchors resist corrosion in saltwater conditions. The sharp triangular flukes penetrate soft seabeds effectively, providing secure grip even during tidal changes and strong currents. Available in 9, 14, 16, and 25-pound sizes, they accommodate boats from 17 to 40 feet with holding capacities between 600 and 1,600 pounds. The lightweight construction simplifies handling and deployment while maintaining durability. Each unit includes a lifetime warranty covering manufacturing and material defects under normal use.

Features:

• Superior Holding Power: Designed to be exceptionally strong and featuring a stainless steel shank, Danforth anchors have sharp flukes that penetrate deeply, ensuring a secure grip while minimizing drag and shifting, even in changing tides or strong currents.
• Lightweight Design: Designed with portability in mind, these fluke anchors are compact and lightweight yet durable. Its construction allows easy handling and deployment, making it ideal for boaters of all experience levels.
• Corrosion-Resistant Construction: The anchor’s galvanized steel offers resistance against corrosion in saltwater environments. This durable finish ensures long-lasting performance, even with regular exposure to harsh marine conditions.

Danforth Anchor Parts

Every Danforth anchor for sale has been manufactured with four main components. Chains, shackles, and other accessories are sold separately. Refer to the diagram below:

• Crown (1): The crown acts as a pivotal point, allowing the flukes to rotate and dig into the seabed. It ensures optimal alignment with the seabed, enhancing holding power.
• Stock (2): The stock stabilizes the anchor, ensuring the flukes are correctly oriented to dig into the seabed, improving holding capacity.
• Flukes (3): Flukes hold securely with wide, flat blades designed to penetrate and grip the seabed. These are critical for high holding power, especially in soft substrates.
• Shank (4): The shank is the primary load-bearing component designed to transmit the pulling force from the vessel to the flukes.

Danforth Anchor Size Chart

Wholesale Marine provides the Danforth fluke anchor in four sizes: 9 lbs, 14 lbs, 16 lbs, and 25 lbs. Our sizing guidelines are based on typical wind conditions, moderate currents, and a minimum 5:1 scope ratio. 

We recommend a minimum 5:1 scope ratio, meaning the length of the anchor line should be at least five times the depth of the water. Increase the scope to 7:1 or more for enhanced holding power, especially in rough conditions.

Consult our fluke anchor size chart below or contact Wholesale Marine for professional advice tailored to your boating needs.

Frequently Asked Questions

What type of seabed does the Danforth fluke anchor work best with?

The Danforth fluke anchor performs exceptionally well in soft seabeds. Its sharp flukes are designed to penetrate deeply into these substrates, providing maximum holding power.

How much holding power does this anchor provide?

Depending on your chosen size, your anchor's holding power can range from 600 to 1,600 lbs. For more information, refer to our fluke anchor size chart.

Can this anchor be used for larger vessels or just small to medium-sized boats?

The largest size of this product weighs 25 lbs and is recommended for boats up to 40ft. We offer other suitable anchors for larger vessels. Contact our team for recommendations.

How do I properly set and retrieve this anchor?

To set the anchor, lower it to the seabed and slowly back your boat away while letting out the anchor line until the flukes dig in securely. To retrieve, gently motor over the anchor while pulling up the line, breaking the flukes free from the seabed.

Is this anchor suitable for anchoring overnight or in high winds?

The Danforth fluke anchor is reliable for overnight anchoring in calm to moderate conditions. For high winds or rough seas, ensure proper sizing and consider additional anchoring measures for added security.

California Residents: WARNING Cancer and Reproductive Harm - P65Warnings.ca.gov