Dexter/UFP K71-077-05 Disc Brake Kit

Dexter/UFP K71-077-05 Disc Brake Kit

This UFP disc brake kit by Dexter comes with everything you need to replace a wheel end disc brake. The kit is designed to fit 3,500 - 3,700 lb axles. The hub, rotor, and caliper are all constructed from zinc. This brake features a 4.5" 5 bolt pattern.This UFP brake kit is designed as a replacement for one wheel.

Kit Includes:

• Qty 1 - 008-435-05 Hub & Rotor
• Qty 1 - 089-008-01 Caliper
• Qty 1 - 010-168-00 1.68" Seal
• Qty 1 - 010-019-00 1.72" Grease Seal
• Qty 1 - 031-033-02 Bearing Cone (L68149)
• Qty 1 - 031-031-02 Bearing Cone (L44649)
• Qty 1 - 021-101-00 Bearing Protector
• Qty 1 - 021-083-00 Bearing Protector Bra
• Qty 1 - 034-323-00 Banjo Fitting
• Qty 1 - 007-307-00 Banjo Bolt
• Qty 1 - 054-119-00 Bleeder Screw
• Qty 2 - 005-169-00 Copper Washer
• Qty 2 - 007-299-00 Hex Bolt
• Qty 5 - 006-080-00 60° Cone Nut

Click here for Dexter Disc Brake Kit Service Manual

Frequently Asked Questions

What is the Dexter/UFP K71-077-05 Disc Brake Kit used for?

The Dexter/UFP K71-077-05 Disc Brake Kit is a replacement wheel-end disc brake kit designed for one wheel. It includes the hub and rotor, caliper, seals, bearings, bearing protection components, brake hardware, and other specified parts needed to replace a wheel-end disc brake.

What axle capacity is the Dexter/UFP K71-077-05 Disc Brake Kit designed for?

This UFP disc brake kit is designed to fit axles rated from 3,500 to 3,700 pounds. Verify your axle capacity before purchasing to ensure the kit is appropriate for your trailer application.

What bolt pattern does the Dexter/UFP K71-077-05 Disc Brake Kit use?

The Dexter/UFP K71-077-05 Disc Brake Kit features a 4.5-inch, 5-bolt pattern. Confirm that your wheel-end configuration matches this specified bolt pattern before installation.

What are the hub, rotor, and caliper made from on the Dexter/UFP K71-077-05?

The hub, rotor, and caliper included in the Dexter/UFP K71-077-05 Disc Brake Kit are constructed from zinc. The kit is designed as a replacement for one wheel on a compatible 3,500- to 3,700-pound axle.

What components are included in the Dexter/UFP K71-077-05 Disc Brake Kit?

The kit includes one hub and rotor, one caliper, two seals, two bearing cones, two bearing protection components, one banjo fitting, one banjo bolt, one bleeder screw, two copper washers, two hex bolts, and five 60° cone nuts.

Is the Dexter/UFP K71-077-05 Disc Brake Kit for one wheel or multiple wheels?

The Dexter/UFP K71-077-05 Disc Brake Kit is designed as a replacement for one wheel. If multiple wheel-end disc brakes require replacement, verify the required quantity for your trailer application before ordering.

California Residents: WARNING Cancer and Reproductive Harm - P65Warnings.ca.gov