Engine_Fuel & Props

T-H Marine Stainless Steel Hose Clamps T-H Marine stainless steel hose clamps are completely made with 300 series stainless components, including the tightening screw. Standard worm gear construction. Packaged in pairs.

T-H Marine Z-Lock Manual Jack Plate Recent product upgrades, such as the Z-Lock Manual Jack Plate design, secure T-H Marine's Hi-Jacker jack plates position as the industry leader. The Z-Lock's design reduces the possibility of side slippage while...

T-H Marine Hi-Jacker Fixed Jack Plate This tough 3/8" thick aluminum bracket provides an inexpensive solution to mounting a long shaft outboard to a short transom. Also great as a fixed jack plate for all V6 outboards. Handles all outboards up to 150 hp...

T-H Marine CMC 5 Inch Motor Mount Vertical Extension Boat motor mounts have several uses. Primarily these extensions are used to convert from a propeller-driven craft to a jet drive. An alternate purpose allows the extension to be mounted on shallow...

T-H Marine Atlas Series Hot Shot Cover Plates Features: Models to Fit All Atlas Jacks Provides Improved Hole Shot Reduces Water Drag at Take Off Reduces Porpoising

Bolt kit for mounting outboard engine to jack plates or tilt & trim units. Kit contains: - 4 each 1/2"-13 x 3" long bolts - stainless steel - 4 each 1/2"-13 lock nuts - brass with nylon insert - 8 each 1/2"-flat washers - stainless steel

T-H Marine Steer Stop Outboard Hydraulic Steering Lock 4" With the T-H Marine Steer Stop Hydraulic Steering Lock, boaters can center their outboard motor equipped with hydraulic steering and keep it from wandering when trailering. The units clip onto...

T-H Marine CMC PT-35 Hydraulic Tilt and Trim The CMC PT-35 Hydraulic Tilt and Trim unit delivers precise control and enhanced performance for outboard motors up to 35 HP. Built with durable 6061-T6 extruded aluminum and stainless steel fasteners, this...

T-H Marine Replacement Atlas Rocker Switch Genuine replacement Rocker Switch for Atlas Jack Plates.

T-H Marine CMC ML-65 Manual Power-Lift Transom Jack Plate - 5-1/2" Set Back Transom jacks are used to adjust the motor higher out of the water for optimal shallow water performance. This essentially provides less drag on the boat. The addition of the...

T-H Marine Trolling Motor Foot Control Switch A Foot Control Switch For Manually Operated (hand controlled) Trolling Motors That Provides the Convenience of Turning the Motor On By Simply Pressing Down On the Switch With Your Foot Without Having to...

TH Marine Atlas Jack Plate Replacement Wire Harness Replacement wire harness for TH Marine Atlas Jack Plates Harness only connectors not included.  

T-H Marine CMC High Speed Hydraulic Power-Lift Transom Jack - 5-1/2" Set Back CMC High Speed Hydraulic Transom Jack is ideal for fresh or salt water use. Made of 6061 T6 alloy aluminum extrusions and fastened with stainless steel fasteners. This transom...

T-H Marine Z-Lock Series Hot Shot Cover Plates   These T-H Marine Hot Shot Cover Plates are designed to fit T-H Marine Z-Lock Manual Jack Plates. These Hole Shot Plates provide improved hole shot. Improved hole shot Reduces drag on take...

T-H Marine Atlas Hydraulic Jack Plates The ATLAS Hydraulic Jack Plate by T-H Marine represents the pinnacle of marine engineering, featuring a self-contained hydraulic system that eliminates the need for separate pumps or reservoirs. With an impressive...

T-H Marine Hi-Jacker Jack Plate The T-H Marine Hi-Jacker Jack Plate is the most recognized brand name in the industry. This plate is constructed of tough 3/8" aircraft aluminum and features a design that allows full tilt with dual steering. All bolts...

CMC Top Transom Washer Plate Features: Made from strong 3/8" 6061 T6 Alloy Aluminum. (Not cast Aluminum) Transom washer can eliminate bolts "biting" into transoms and can more evenly distribute loads on high performance engines. Hole Centers: 12-7/8"

CMC Bottom Transom Washer Plate Features: Made from strong 3/8" 6061 T6 Alloy Aluminum. (Not cast Aluminum) Transom washer can eliminate bolts "biting" into transoms and can more evenly distribute loads on high performance engines. Hole Centers: 9-7/8"

T-H Marine Mini-Jacker Features: "Clamp Style" Small Outboard Jack Plate Cast Aluminum Bracket Marine Grade Transom Block 4" Setback -3" Vertical Max Weight- 150lbs; Max 35 HP

TH Marine Aluminum Throttle Control Mount TH Marine's Aluminum Throttle Control Mount is easy to install and made of high quality 3/32" aluminum sheeting. Great for control boxes on gunwales of aluminum and some fiberglass boats.  Product...