Evercoat Gel Coat Scratch Patch

Evercoat Marine Gel Coat Scratch Patch

Use Evercoat Gel Coat Scratch & Patch to repair fiberglass boats, bathtubs, shower stalls and hot tubs. This product provides easy permanent repairs on hairline cracks, small scratches and chips in fiberglass. This one part formula does not need a catalyst. Just fill in the crack, let is set and scrape off the excess with the enclosed spreader. It is just that easy. Clear Scratch Patch is ideal for surface scratch repairs of metal flake finish. Available in 1/2 fl. oz.  ounce bottle.

Features:

• Includes spreader for removing excess
• Fast, easy-to-use fiberglass gel coat repair
• Also repairs paint, linoleum, Formica, and some plastics
• 1/2 fl. oz.

How to Use Evercoat Gel Coat Scratch Patch

Apply Evercoat Gel Coat Scratch Patch at temperatures 60°F or above.

• Clean surface and allow to completely dry.
• Apply enough product to fill scratch or chip, allowing a small excess to build up above & around area.
• Allow to dry for 15 minutes.
• Remove excess with plastic scraper (included).
• Allow area to dry for an additional 30 minutes.
• Finish area with a marine wax.
• Avoid washing or scrubbing the area for 3 days.

Note: Color tends to darken after drying.

Frequently Asked Questions

What is Evercoat Marine Gel Coat Scratch Patch used for?

Evercoat Gel Coat Scratch & Patch is a one-part repair product for permanent repairs to hairline cracks, small scratches, and chips. It can be used on fiberglass boats, bathtubs, shower stalls, and hot tubs, and is also suitable for repairing paint, linoleum, Formica, and some plastics.

Does Evercoat Gel Coat Scratch Patch require a catalyst?

No. Evercoat Gel Coat Scratch Patch uses a one-part formula that does not require a catalyst. Apply enough product to fill the scratch or chip, allow it to dry, and remove the excess with the included plastic spreader.

How do you apply Evercoat Marine Gel Coat Scratch Patch?

Use Evercoat Gel Coat Scratch Patch at temperatures of 60°F or above. Clean and completely dry the surface, then fill the scratch or chip with a small excess above and around the repair. Allow it to dry for 15 minutes, remove the excess with the included scraper, and allow the area to dry for another 30 minutes.

How long should Evercoat Gel Coat Scratch Patch dry before finishing?

After application, allow the product to dry for 15 minutes before removing excess material with the included plastic scraper. Then allow the repaired area to dry for an additional 30 minutes before finishing it with a marine wax.

Is Evercoat Clear Scratch Patch suitable for metal flake finishes?

Yes. Evercoat Clear Scratch Patch is ideal for surface scratch repairs on metal flake finishes. The product is available in a 1/2 fl. oz. bottle and includes a spreader for removing excess material.

How should an Evercoat Gel Coat Scratch Patch repair be cared for after application?

After finishing the repaired area with marine wax, avoid washing or scrubbing the area for 3 days. Keep in mind that the color of the product tends to darken after drying.

California Residents: WARNING Cancer and Reproductive Harm - P65Warnings.ca.gov