Fortress Marine Anchor

Fortress Marine Aluminum Fluke Anchor

Fortress Marine Anchors deliver professional-grade holding power through high-tensile aluminum alloy construction that matches steel strength at significantly reduced weight. Models span from the 4-pound FX7 to the 69-pound FX125, accommodating vessels up to 150 feet. Adjustable fluke angles optimize performance across varying bottom conditions - 32 degrees for clay, mud, or sand, and 45 degrees for soft mud. Sharp edges enable quick penetration, with proven pull loads exceeding 200 times the anchor's weight. The corrosion-resistant, anodized finish ensures durability, while the disassemblable design simplifies storage. U.S. Navy testing confirms Fortress anchors outperform heavier steel alternatives without compromising structural integrity. Each unit includes a lifetime parts replacement warranty for reliable vessel security.

Features:

• Fortress Marine Anchors are manufactured with lightweight high tensile aluminum alloy that is as strong as steel.
• Corrosion-resistant durable anodized finish.
• Rust proof finish
• Sharper than heavy-duty dull-edged steel anchors
• Disassembles for easy storage
• Great spare or storm anchor
• Features Lifetime Hassle-Free Parts Replacement Warranty

NOTE: Boat size recommendations factor in average windage and proportions in 30 knots of wind, average bottom conditions, and moderate protection from open seas. Also, note that loads in 42 knots of wind ‘weigh’ twice as much as in 30 knots.

We recommend using a three-strand nylon rope, 6-12 ft (2-4 m) of chain, and a minimum of 5:1 scope. Also, a minimum of 6 ft (2 m) of chain should be used for every 25 ft (8 m) of water depth. For storm conditions use an anchor one or two sizes larger.

How to Set a Fortress Fluke Anchor:

Frequently Asked Questions

What is the Fortress Marine Aluminum Fluke Anchor designed for?

The Fortress Marine Aluminum Fluke Anchor is designed to provide high holding power while using lightweight, high-tensile aluminum alloy construction. Models range from the 4 lb FX7 to the 69 lb FX125, with recommended boat sizes ranging from 16 to 150 feet depending on the selected model.

How do I choose the correct Fortress Fluke Anchor model for my boat?

Select the anchor model based on the recommended boat size and working load listed for each model. The FX7 is recommended for boats from 16-27 feet, while the FX125 is listed for boats from 69-150 feet. The recommendations assume average windage, 30-knot winds, average bottom conditions, and moderate protection from open seas.

Can the Fortress Marine Aluminum Fluke Anchor be adjusted for different bottom conditions?

Yes. The Fortress Fluke Anchor uses adjustable fluke angles to optimize performance across different bottom conditions. The product information specifies a 32° setting for clay, mud, or sand and a 45° setting for soft mud.

How should the Fortress Marine Aluminum Fluke Anchor be stored?

The Fortress Fluke Anchor can be disassembled for easier storage. Its lightweight aluminum alloy construction also reduces the weight that needs to be handled when installing, removing, or storing the anchor.

What rode and scope are recommended for a Fortress Fluke Anchor?

The product information recommends using three-strand nylon rope with 6-12 feet of chain and a minimum 5:1 scope. It also recommends at least 6 feet of chain for every 25 feet of water depth. For storm conditions, an anchor one or two sizes larger is recommended.

What warranty is included with the Fortress Marine Aluminum Fluke Anchor?

The Fortress Marine Aluminum Fluke Anchor includes a lifetime hassle-free parts replacement warranty. The product description also identifies the anchor as corrosion-resistant, rustproof, and finished with a durable anodized coating.

California Residents: WARNING Cancer and Reproductive Harm - P65Warnings.ca.gov