7833

Fuel Tanks & Systems

      Product Listing

      • Sea Dog Hose Thru Vent
        $4.49
        $3.99

        Sea Dog Hose Thru Vent 3" Size: 3-5/8" Square 4" Size: 4-15/16" Square Injection Molded ABS

        Choose Options
      • Attwood Louvered Marine Plastic Venturi Vent - Black
        $18.96
        $16.49

        Attwood Louvered Marine Plastic Venturi Vent Attwood hull-mounted vents are designed to install by fastening as a complete unit from either inside or outside the hull. Ventilation hose (not included) twists into the bottom of the box to form a raised...

        Choose Options
      • Sea Dog Stainless Steel Round Louvered Vent
        $11.99
        $10.49

        Sea Dog Stainless Steel Round Louvered Vent This Sea Dog Stainless Steel Louvered Air Vent is constructed of corrosion-resistant stamped 304 stainless steel. Allows air in while keeping water out. Stainless steel round louvered vent. Measures 5"...

        Add to Cart
      • Perko Vented Gas Deck Fill & Tank Vent
        $40.99
        $29.49

        Integral tank vent with flame arrestor. No deck plate key or ground wire required. Black plastic with flip top cap. 2-7/16" neck length, 1-1/2" for fuel hose, 5/8" for vent hose.

        Add to Cart
      • Perko Chrome Clam Shell Ventilator
        $8.49
        $6.49

        Perko Chrome Clam Shell Ventilator Perko clam shell ventilators are ideal for many applications, from covering vent holes for battery boxes, water tanks, and fuel tanks to venting engine compartments. Made of chrome plated brass. Each is pre-drilled for...

        Add to Cart
      • Sea Dog Molded Abs Flush Vent
        $6.89
        $5.99

        Flush Vent of injection molded abs.Hole size up to 4". Vent area 4.05 sq.in. Pre-drilled for # 8 F.H. Screw.Overall dimensions 4 15/16" x 4 15/16"

        Choose Options
      • Moeller Marine Chrome Thru-Hull Fuel Tank Vent
        $24.49
        $19.49

        Moeller 035732-10 Chrome Thru-Hull Fuel Tank Vent Thru-Hull Vent for Hulls Up to 1/2" Thick Accommodates 5/8" Vent Hose Vent hose to the fuel tank for thru-hull ventilation Chrome Plated Finish

        Add to Cart
      • Perko Gas Tank Vent with Rotating Barbed Elbow
        $26.99
        $19.49

        Gas Tank Vent with 90 degree swivel elbow. Chrome plated zinc alloy cap with zinc alloy elbow. Black plastic splash guard. Removable 30 mesh stainless steel wire screen flame arrestor. Design allows elbow to be rotated to any position. Hose size 5/8"...

        Add to Cart
      • Sea Dog Stainless Steel Recessed louvered Vent
        $41.99
        $35.49

        Sea Dog Stainless Steel Recessed Louvered Vent This Stainless Recessed Vent can be used in conjunction with Sea-Dog’s Polypropylene Collector Box part number 331202, 331203, 331204. It is designed to allow a flush surface at the vent area reducing...

        Add to Cart
      • Attwood Louvered Marine Vent Stainless Steel
        $60.49
        $47.48

        Attwood Louvered Marine Vent Stainless Steel Attwood hull-mounted vents are designed to install by fastening as a complete unit from either inside or outside the hull. Ventilation hose (not included) twists into the bottom of the box to form a raised...

        Add to Cart
      • Sea Dog Stainless Steel Louvered Vent
        $54.99
        $46.99

        Sea Dog Stainless Steel Louvered Vent The Sea-Dog Stainless Ventilator part numbers 331290-3 and 331300 can be used in conjunction with the Sea-Dog ABS Collector boxes:331293-331298 for model 331290 and Collector boxes:331303-331304 for model 331300...

        Add to Cart
      • Attwood Marine Fuel Tank Vent - Straight
        $10.99
        $8.84

        Attwood Marine Fuel Tank Vent - Straight Patented splash-resistant, corrosion-resistant polypropylene. Meets ABYC ventilation specifications. All Attwood fuel tank vents meet or exceed U.S. Coast Guard regulations. Hose Size 5/8" ID <

        Add to Cart

      Marine Gas Tanks

      For filling and maintaining your boat’s fuel tank systems, turn to the professionals at Wholesale Marine. We carry an extensive line of boat gas tanks from leading manufacturers for both inboard and outboard engine fuel tank systems. Whether you need a fuel filter, a fuel pickup tube, a funnel for pouring, a portable fuel tank, a complete fuel line assembly, hoses and connectors, senders and gauges, a replacement tank, fuel additives, gas caps and deck fills, or just a 14 gallon jerry can by Flo-N-Go, we have you covered. If you are not exactly certain about what you need, speak with our professional staff for solid advice.

      Regardless of its engine, every craft will have a permanent fuel tank below the deck with lines running to either its outboard or inboard engine. Fuel lines require routine maintenance. Wholesale Marine recommends using a fuel line treatment product such as Stabil or StarTron. It’s ironic, but water is the enemy of most boat systems and this is especially true of the fuel system. To maintain your permanent fuel tank (these are also known as boat gas tanks), here are some helpful tips from Wholesale Marine to protect your boat’s entire fuel system from costly repairs:

      1. Water in an engine’s fuel system leads to corrosion and corrosion leads to engine breakdown. Take action quickly when you first locate water in the fuel line or marine gas tank to possibly avoid repair bills altogether.
      2. Water sits under the fuel in a separate layer. If you are offshore and discover water in your fuel and your filter bowl is less than a quarter full of water, drain it and change the filter immediately. Then head in with caution.

      3. Gas inboards require metal filter bowls. Open the valve from underneath, and be sure to reinstall the safety plug in the drain valve

      4. Marine Gas Tanks’ Primary filters (the first filter after the fuel tank) block small amounts of water, but a larger amount might make it through. Be sure to check by dumping fuel from the secondary filter into a bucket and look for any water bubbles.

      5. Flush clean fuel from a jerry can through the engine to the connection at the high-pressure diesel injection pump or the gasoline injector supply rail. Be sure to use a filtered line. Most diesel engines have a manual fuel pump near the secondary filter or on the low-pressure supply pump. On gas engines, turn the ignition on and off to briefly run the fuel pump.

      6. If the motor stalled because of water, loosen diesel injector lines and turn the engine over with the starter until clean fuel runs through it. For gas engines, remove a sensor or plug at the far end of the supply rail and flush it there.

      7. Clean the tank and find the cause. Remove any sludge and inspect for deteriorated fuel fill-cap O-rings or gauge sender gasket seals. Replace as necessary. If your boat’s fuel line runs clean, your engine will as well. Therefore, it is very important that the fuel line be inspected routinely to avoid costly engine repairs caused by a faulty fuel line.

      We Stock Marine Gas Tanks at Wholesale Marine

      Should yours need replacement, know that Wholesale Marine stocks a large selection of below deck boat gas tanks and fuel system parts. If you are not sure what tank you need, give us a call. We’re boating enthusiasts, too and want you to enjoy your life on the water as much as we do. Call us: (877) 388-2628, Monday through Friday, 9:00 AM until 6:00 PM, EST.