Fulton Aluminum Trailer Hitch Ball Mount 8000 lbs. GTW

Fulton Aluminum Trailer Hitch Ball Mount 8000 lbs. GTW - 2" Hitch

The Fulton Aluminum Trailer Ball Mount is a standard aluminum ball mount designed for towing loads up to 8,000 lbs. GTW, and a TW of 800 lbs. This ball mount features a solid one-piece forged construction with a highly polished, weather-resistant aluminum finish. The Fulton Aluminum Ball Mount is ideal for trucks with a two inch square box opening. Mount is backed by Fulton's limited lifetime warranty.

 Features:

• Solid one-piece forged construction
• Highly polished, weather-resistant aluminum finish
• Limited lifetime warranty

 Specifications:

• Fits 2" square receiver tube opening
• 1" Thick x 3" Wide ball platforms
• Load Rating Class: IV

How to Select the Right Fulton Aluminum Trailer Ball Mount

The below information is sourced from the manufacturer.

• Measure from the ground to the top of the hitch.
• Measure from the ground to the (inside) top of the trailer coupler (when level).
• Subtract the height of the hitch ball from the coupler measurement (most are 2-1/2" - 3" high)

The difference in the two measurements is the amount of ball mount rise or drop is required.

For the specifications above, keep in mind the following:

• Length = distance from the center of the ball hole to the center of the pin hole
• Rise = Distance from the top of the shank to the top of the ball platform
• Drop = Distance rom the top of the shank to the top of the ball platform

California Residents: WARNING Cancer and Reproductive Harm - P65Warnings.ca.gov