Garelick Stainless Steel Ladder With 11" Hook

HOW TO ASSEMBLE GARELICK STAINLESS STEEL LADDER WITH 11” HOOK

Assembly Instructions:

• Attach stand-offs for the ladder on the lowest step possible so stand-off abuts the hull of the boat and the ladder hangs over the side in a perpendicular position.
  • Note: If necessary, stand-offs can be shortened by cutting with a hack saw to desired length.
• Drill through pilot hole on bottom side of step using a 17/64” diameter drill bit.
• Use ¼” bolts and nuts (included) to attach stand-offs. After stand-offs are attached, place poly tips on the ends.
  • Note: In some cases, it may be easier to slip poly tips on after warming in hot water.

Maintenance:

• Periodically check mounting hardware and re-tighten (due to normal boat operation).
• Regular fresh water rinsing and periodic cleaning with a mild abrasive cleaner will help retain luster and help prevent corrosion.

Safety:

• This ladder is designed for boat use only
• Never operate your boat with the ladder in positon. Serious injury or damage to your boat or ladder may result. 

Sourced from Garelick Product Technical Information

Installation Instructions