Jabsco Lite Flush Electric Toilet

Jabsco Lite Flush Electric Toilet w/ Foot Switch 12V

The Jabsco Lite Flush Toilet is designed with the same footprint as a Jabsco manual toilet. Features a single touch fully automatic foot switch. 

• Space saving stylish design
• Compact size, rotatable seat
• Virtually silent operation
• Choice of leaving bowl wet or dry after use
• Non-clogging large bore flush pump macerates waste
• Uses less than 1/0 amp/hour per day
• Raw water only
• Complies with ISO 8846 MARINE [Ignition protection].

Flush pump is internally mounted, high-speed, non-clogging, centrifugal, waste macerating pump driven by powerful 240 watt, 12V permanent magnet motor with ball bearings and robust ceramic seal. Discharges up to 5ft above the base of the toilet.

Rinse pump is a Jabsco, self-priming up to 3ft, dry running diaphragm water pump. Driven by 12V permanent magnet, ball bearing motor. 

Foot switch is integral one touch 'Press and Release' switch pad, sealed for life.

Port(s): Raw water rinse pump inlet - 3/4" hose tails. Flush pump discharge - 1-1/2" hose tail.

Frequently Asked Questions

What is the Jabsco Lite Flush Electric Toilet with Foot Switch 12V used for?

The Jabsco Lite Flush Electric Toilet with Foot Switch 12V is a compact electric marine toilet designed with the same footprint as a Jabsco manual toilet. It features a one-touch automatic foot switch, space-saving design, virtually silent operation, and a rotatable seat.

How does the foot switch work on the Jabsco Lite Flush Electric Toilet?

The integral foot switch uses a one-touch "Press and Release" switch pad for operation. The switch is sealed for life and provides a simple way to operate the toilet.

Does the Jabsco Lite Flush Electric Toilet use raw water or freshwater?

The Jabsco Lite Flush Electric Toilet is specified for raw water only. Its rinse pump is a self-priming, dry-running diaphragm water pump that can self-prime up to 3 feet. The raw water rinse pump inlet uses 3/4-inch hose tails.

What type of flush pump does the Jabsco Lite Flush Electric Toilet have?

The toilet has an internally mounted, high-speed centrifugal flush pump with a non-clogging, waste-macerating design. It is driven by a 240-watt, 12V permanent magnet motor with ball bearings and a ceramic seal. The flush pump can discharge up to 5 feet above the toilet base.

What are the plumbing connections on the Jabsco Lite Flush Electric Toilet?

The raw water rinse pump inlet uses 3/4-inch hose tails, while the flush pump discharge uses a 1-1/2-inch hose tail. Verify that the plumbing connections in the installation match these specified sizes before installation.

Is the Jabsco Lite Flush Electric Toilet ignition protected?

Yes. The Jabsco Lite Flush Electric Toilet complies with ISO 8846 MARINE for ignition protection. The toilet also features virtually silent operation and allows the bowl to be left either wet or dry after use.

California Residents: WARNING Cancer and Reproductive Harm - P65Warnings.ca.gov