Johnson Evinrude OMC Engine Tuner

Johnson Evinrude OMC Engine Tuner

Keep your Johnson Evinrude outboard running at peak performance with OMC Engine Tuner. This effective treatment removes harmful carbon deposits, gum, and varnish from rings, pistons, valves, and ports. Simply spray through the air intake of your 2 or 4-cycle engine for better power and efficiency. Regular maintenance every 50 hours or annually helps maintain optimal engine function. Works great on marine engines, power tools, and snowmobiles too.

Features:

• 13 oz. Spray Can
• Removes deposits
• Cleans combustion chambers
• Not to be mixed with oil

Instructions:

• Remove propeller.
• Run motor to normal operating temperature - Never Run Motor Without Cooling Water.
• Set motor at fast idle (about 1200 RPM).
• Spray can contents into carburetor throat(s).
• Do not let motor stall until can is empty.
• When can is empty, turn off motor and let soak for 3 to 16 hours.
• Restart motor and run at fast idle (1500 RPM) for at least 15 minutes.

Johnson Evinrude OMC Engine Tuner FAQs

What does Johnson Evinrude OMC Engine Tuner do?

Johnson Evinrude OMC Engine Tuner helps remove carbon deposits, gum, and varnish from rings, pistons, valves, ports, and combustion chambers.

Can OMC Engine Tuner be used on 2-cycle and 4-cycle engines?

Yes, OMC Engine Tuner can be used on 2-cycle and 4-cycle engines.

How often should I use Johnson Evinrude OMC Engine Tuner?

Use Johnson Evinrude OMC Engine Tuner every 50 hours of operation or once per year as part of regular engine maintenance.

Do I mix OMC Engine Tuner with oil?

No, OMC Engine Tuner should not be mixed with oil.

How do I apply OMC Engine Tuner?

Remove the propeller, run the motor to normal operating temperature with cooling water supplied, set the motor at fast idle, spray the contents into the carburetor throat, let it soak for 3 to 16 hours, then restart and run the motor at fast idle for at least 15 minutes.

California Residents: WARNING Cancer and Reproductive Harm - P65Warnings.ca.gov