Lenco 101XDS Short Replacement Trim Tab Actuator

Lenco 15058-001 101XDS Short Replacement Trim Tab Actuator

Lenco Actuators are durable and maintenance-free. Precision molded, powdered metal, high alloy gears provide high accuracy, high wear resistance and high strength for long life. Lenco's ballscrew design creates a more reliable trim tab actuator that is twice as powerful compared to typical hydraulic actuators. This 12V actuator features a tough, high-torque motor that easily pushes 500lbs.

Built for marine environments, this actuator has an improved O-ring design and an integrated wiper seal. The waterproof Deutsch connector eliminates the possibility of water intrusion and makes for easy plug and play installation. This trim tab kit contains all necessary mounting hardware along with a 6' wire. This actuator has a 3/8" top and end hole.

• Lenco Part#: 15058-001
• OEM Part#: 20402-002

Trim Tab Actuator Construction Details:

• Top Cap Design
• Stronger top cap mounting clevis design.
• Torx Screws
• New & improved pressure-tight torx screws
• Thrust Bearing
• Molded-in thrust bearing design
• Housing Wall
• Thicker and stronger motor housing wall
• Over-Molded Cable
• Over-molded cable providing a stronger, tighter seal
• Upper Bracket
• Upper mounting bracket with gland seal

Specifications:

• Top Cap Hole: 3/8"
• End Hole: 3/8"
• Stroke Length: 2-1/4"
• Voltage: 12V
• Wire Length: 6'
• Overall Length Tip-to-Tip: 10-7/8"

Features:

• Waterproof
• Ball Screw Design.
• Deutsch Connectors
• Durable
• Insant Response
• High-Impact, ultraviolet resistant nylon

Lenco 101XDS Replacement Actuator FAQs

Will the Lenco 15058-001 actuator fit my boat?

The Lenco 15058-001 may be the correct replacement if your existing trim tab system uses a 12V 101XDS short actuator with a 2.25-inch stroke, 3/8-inch top-cap hole, and 3/8-inch end hole. It replaces Lenco OEM part number 20402-002. Confirm the existing actuator type, voltage, stroke length, mounting-hole configuration, and part number before ordering.

What OEM part number does the Lenco 15058-001 replace?

The Lenco 15058-001 101XDS short actuator replaces OEM part number 20402-002.

What is the stroke length of the Lenco 15058-001 actuator?

This Lenco 101XDS short replacement actuator has a 2.25-inch stroke and an overall tip-to-tip length of 10.875 inches.

What mounting-hole sizes does this actuator use?

The Lenco 15058-001 uses a 3/8-inch top-cap mounting hole and a 3/8-inch end mounting hole. Both mounting points should match the existing actuator installation.

Is the Lenco 15058-001 a 12V or 24V actuator?

The Lenco 15058-001 is a 12V trim tab actuator. It should be used only with a compatible 12V Lenco trim tab system.

What is included with the Lenco 15058-001 actuator?

This replacement actuator includes the necessary mounting hardware and a six-foot wire.

Does the Lenco 15058-001 use a waterproof connector?

Yes. The actuator uses a waterproof Deutsch connector designed to reduce the possibility of water intrusion and support plug-and-play installation.

How do I identify my existing Lenco trim tab actuator?

Locate the five-digit branding code on the face of the actuator near the Lenco label. Use the second digit to identify the actuator type and the fifth digit to identify the mounting-hole configuration. Compare the code, voltage, stroke length, mounting-hole sizes, and OEM part number before selecting a replacement. See our Lenco trim tab actuator identification guide for step-by-step help.

Are Lenco 101XDS actuators interchangeable?

Not all Lenco 101XDS actuators are interchangeable. Replacement models may differ in stroke length, voltage, mounting-hole sizes, wire configuration, and OEM part number. Verify all specifications rather than choosing an actuator based only on appearance.

Can I replace only one Lenco trim tab actuator?

A single actuator may be replaced when the new actuator matches the existing trim tab system and the actuator on the opposite side is still operating correctly. Inspect both actuators, the trim tab blades, wiring, controls, connectors, and mounting hardware before completing the repair.

Click here for Lenco 101XDS Trim Tab Actuator Replacement Guide

California Residents: WARNING Cancer and Reproductive Harm - P65Warnings.ca.gov