Marine Electronics Mounts

Scanstrut Forward Leaning PowerTower 6" Radar Mount The PowerTower radar mount by Scanstrut sits 6" high, constructed with marine grade aluminum. The PowerTower has a 4-step marine paint system and includes a DS30 cable seal to ensure a waterproof seal...

Add to Cart

Scanstrut Forward Leaning PowerTower 6" Radar Mount - 33° Rake The PowerTower radar mount by Scanstrut sits 6" high, constructed with marine grade aluminum. The PowerTower has a 4-step marine paint system and includes a DS30 cable seal to ensure a...

Add to Cart

Scanstrut HS-01 Hinge Base Mount The Scanstrut Base Mount is constructed to cautiously pivot your Satcom installation through 180°, significantly lowering the height of the installation. The Base Mount is a passive system that...

Add to Cart

Scanstrut LMB-A2 Self-Levelling Aft Facing Backstay Radar Mount This backstay radar mount from Scanstrut sits 8'6" high and mounts forward of the backstay, keeping your radar clear from interference and your deck obstruction free. Constructed from marine...

Add to Cart

Scanstrut LMBF-1 Self Leveling Backstay Radar Mount This self leveling backstay radar mount by Scanstrut sits 2.6m (8'6") high and mounts forward on the backstay. This helps keep interference away from your radar and a deck clear from obstruction...

Add to Cart

Scanstrut LMBF-2 Self Leveling Backstay Radar Mount This self leveling backstay radar mount by Scanstrut sits 2.6m (8'6") high and mounts forward on the backstay. This helps keep interference away from your radar and a deck clear from obstruction...

Add to Cart

Scanstrut LMM-1 Self-Levelling Radar Mount – Mast The Scanstrut Self-Levelling Radar Mount is constructed of stainless radar cradle that has a fine tune adjustment for different mast rake angles. The Self-leveling mount complete system weighs 3.4kg...

Add to Cart

Scanstrut LMM-2 Self-Levelling Radar Mount – Mast The Scanstrut Self-Levelling Radar Mount is constructed of stainless radar cradle that has a fine tune adjustment for different mast rake angles. The Self-leveling mount complete system weighs 3.4kg...

Add to Cart

Scanstrut LMP-1 Self-Levelling Radar Mount – Pole The Scanstrut Self-Levelling Radar Pole Mount attributes a fine-tuned hydraulic damping system which reacts to important changes in heel angle of the boat. The Pole mount is maintenance free and no...

Add to Cart

Scanstrut LMP-2 Self-Levelling Radar Mount – Pole  The Scanstrut Self-Levelling Radar Pole Mount attributes a fine-tuned hydraulic damping system which reacts to important changes in heel angle of the boat. The Pole mount is maintenance free...

Add to Cart

Scanstrut M92698 Mast Mount The Scanstrut Mast Mount is constructed of marine-grade aluminum and coated with Scanstruts distinctive 4-step marine paint system. The 4-step marine paint system ensures a long lasting quality. The mount has a 360°...

Add to Cart

Scanstrut M92722 Mast Mount The Scanstrut Mast Mount is constructed of marine-grade aluminum and coated with Scanstruts distinctive 4-step marine paint system. The 4-step marine paint system ensures a long lasting quality. The mount has a 360°...

Add to Cart

Scanstrut CAM-PT150-02 6" (150mm) PowerTower Mount The PowerTower Camera mount by Scanstrut was designed in partnership with Raymarine to create the optimum mounts for the FLIR M100/M200 series camera. Constructed from marine grade aluminum with...

Add to Cart

Scanstrut APT-GPS-01 PowerTower Central GPS/VHF Antenna Bar This Scanstrut central GPS/VHF antenna bar is designed to use with the PowerTower radar mount. The hollowed out inside of the light bar allows you internally route your cable into the PowerTower...

Add to Cart

Scanstrut APT-LB-GPS2-01 PowerTower Central Light Bar w/ 2 Antennas & Nav Light This central light bar by Scanstrut offers two antenna and a single nav light spot for use with PowerTower radar mounts. Designed to fit a wide range of Navlights and a...

Add to Cart

Scanstrut CAM-PT-150-03 PowerTower Flir M300 Camera Mount This PowerTower Camera mount by Scanstrut is specifically designed for the FLIR M300 range to ensure a perfect fir for your camera. Sitting 6" (150mm) high, this camera mount is easy to install on...

Add to Cart

Scanstrut PTM-R1-1 Tapered Radar Mast The Scanstrut Tapered Radar Mast is a single combination mount for radar, lights, GPS/VHF antennas, cameras or searchlights. The single combination positions each item perfectly for maximum performance. The Tapered...

Add to Cart

Scanstrut PTM-R1-2 Tapered Radar Mast The Scanstrut Tapered Radar Mast is a single combination mount for radar, lights, GPS/VHF antennas, cameras or searchlights. The single combination positions each item perfectly for maximum performance. The Tapered...

Add to Cart

Scanstrut PTM-R1-S40 Tapered Radar Mast  The Scanstrut Tapered Radar Mast is a single combination mount for radar, lights, GPS/VHF antennas, cameras or searchlights. The single combination positions each item perfectly for maximum performance. The...

Add to Cart

Scanstrut PTM-R2-S40 Tapered Radar Mast  The Scanstrut Tapered Radar Mast is a single combination mount for radar, lights, GPS/VHF antennas, cameras or searchlights. The single combination positions each item perfectly for maximum performance. The...

Add to Cart