Mercury 8M0107510 2.1L 75/90/115 HP 4-Stroke Oil Change Kit

Mercury 8M0107510 2.1L 75/90/115 HP 4-Stroke Oil Change Kit 

This complete oil change kit is designed specifically for Mercury 2.1L 75/90/115 HP 4-stroke outboards with serial numbers 2B094996 and up. The package includes five quarts of Mercury 10W-30 marine engine oil with advanced anti-wear additives that provide 33% better camshaft protection than competing products. You'll also receive a genuine Mercury oil filter and drain hose for a thorough maintenance service. The marine-specific formula maintains viscosity during high-RPM operation and offers superior corrosion resistance for saltwater environments and off-season storage. Instructions are printed directly on the box for convenient reference. Recommended maintenance interval is every 100 hours of operation or annually, whichever comes first.

This Mercury 4-stroke oil change kit contains all the items needed to change the oil in select Mercury 4-Stroke Outboards:

• (5) 10W-30 Mercury 4-Stroke Engine Oil
• (1) Oil Filter - OEM 8M0065104 SS to 35-8M0162829
• (1) Drain Hose - OEM 8M0108358
• For easy reference, complete instructions are printed on the box

For use with engine serial numbers 2B094996 & up.

Interval: Check engine oil and replace oil filter every 100 hours of use, or annually (whichever comes first).

Mercury 4-Stroke Oil Change Kit Instructions

Oil Change Procedure

• Position the outboard for trailering.
• Adjust the outboard steering until the drain hole is facing downward. Remove the drain plug with an 18mm wrench.
• Drain the engine oil into an appropriate container.
• Place a new seal on the drain plug and lubricate.
• Reinstall components.

Changing the Oil Filter

• Place a drop cloth, rag, or towel below the oil filter to catch any spilled oil.
• Use a counter-clockwise motion to unscrew the old filter.
• Clean the mounting base. Apply a thin film of clean oil to the filter gasket.
• Screw the new filter on until the gasket contacts the base, then tighten only by a 3/4 turn.
• Be careful not to overtighten.

Oil Filling

• With the oil cap removed, add approx 5 liters of oil to the midpoint of the operating range (midpoint of the cross-hatched region).
• Reinstall the oil fill cap.
• Idle the engine for five minutes and check for leaks. Stop the engine and inspect the oil level using a dipstick.
• Add oil if necessary.

Frequently Asked Questions

What is the Mercury 8M0107510 2.1L 75/90/115 HP 4-Stroke Oil Change Kit used for?

The Mercury 8M0107510 2.1L 75/90/115 HP 4-Stroke Oil Change Kit is designed for select Mercury 2.1L 75, 90, and 115 HP 4-stroke outboards with serial numbers 2B094996 and up. It includes engine oil, an OEM oil filter, and a drain hose for an oil change service.

What Mercury outboards is the 8M0107510 oil change kit compatible with?

This kit is specified for Mercury 2.1L 75, 90, and 115 HP 4-stroke outboards with serial numbers 2B094996 and up. Verify your engine's serial number and specifications before using the kit to confirm compatibility.

What is included in the Mercury 8M0107510 oil change kit?

The kit includes five quarts of Mercury 10W-30 4-stroke engine oil, one OEM oil filter, and one OEM drain hose. The oil filter is OEM 8M0065104 SS to 35-8M0162829, and the drain hose is OEM 8M0108358. Complete oil change instructions are also printed on the box.

How often should the oil and filter be changed with the Mercury 8M0107510 kit?

The specified maintenance interval is every 100 hours of use or annually, whichever comes first. The product instructions state to check the engine oil and replace the oil filter at this interval.

How much oil does the Mercury 8M0107510 oil change procedure require?

The supplied instructions state to add approximately 5 liters of oil with the oil cap removed, filling to the midpoint of the operating range. After filling, reinstall the cap, idle the engine for five minutes, check for leaks, and inspect the oil level using the dipstick.

Does the Mercury 8M0107510 kit include instructions for changing the oil filter?

Yes. Complete instructions are printed on the box. The procedure includes removing the old filter, cleaning the mounting base, applying a thin film of clean oil to the new filter gasket, and tightening the new filter until the gasket contacts the base, followed by an additional 3/4 turn.

California Residents: WARNING Cancer and Reproductive Harm - P65Warnings.ca.gov