MPI Fuel Hose 350-1120, 1 1/2"

MPI Marine Products 350-1120 Fuel Fill Hose 1 1/2"

Since 2012, marine fuel filler hoses must meet stricter standards than before. If you are replacing your recreational craft’s fuel fill hose, it is essential to have a fill hose that resists the detrimental and degrading effects of ethanol. Through prolonged use, this compound’s properties can break down most hoses, as residual ethanol fuel blends usually remain in the hose after filling the tank. Sierra Shields’ marine MPI fuel hose resists ethanol deterioration while a wire helix, woven into the ‘fabric’ allows the hose to make tight radius bends to accommodate docking and mooring berths at fill-up stations. 

Features:

• Fuel Fill - Gas Or Diesel
• For Pleasure Boats Only
• Resists gasoline/alcohol blends.
• Compounded for low permeation.
• Reinforced with wire embedded between plies of HD synthetic cord
• MPI fuel hose is abrasion resistant

Ratings:

• MPI fuel hose meets SAE J1527 Type A2 and ISO 7840 Type A2
• NMMA and CE type accepted

Size:

• Size: 1-1/2" Interior Diameter
• 2 Ply Synthetic Fabric
• 90# Burst Pressure

NOTE: SOLD BY THE FOOT

Frequently Asked Questions

What is the MPI Marine Products 350-1120 Fuel Fill Hose designed for?

The MPI Marine Products 350-1120 Fuel Fill Hose is designed for fuel fill applications on pleasure boats using gasoline or diesel. It has a 1-1/2-inch interior diameter and is compounded for low permeation.

Does the MPI 350-1120 Fuel Fill Hose resist ethanol fuel blends?

Yes. The MPI 350-1120 Fuel Fill Hose is designed to resist deterioration from gasoline and alcohol blends, including ethanol. This makes its resistance to ethanol deterioration an important consideration when replacing a recreational craft's fuel fill hose.

What type of reinforcement does the MPI Marine Products 350-1120 Fuel Fill Hose have?

The MPI 350-1120 Fuel Fill Hose is reinforced with wire embedded between plies of high-density synthetic cord. Its wire helix allows the hose to make tight-radius bends, while the hose is also designed to resist abrasion.

What standards does the MPI 350-1120 Fuel Fill Hose meet?

The MPI 350-1120 Fuel Fill Hose meets SAE J1527 Type A2 and ISO 7840 Type A2 requirements. The product description also states that the MPI fuel hose is NMMA and CE type accepted.

What are the specifications of the MPI Marine Products 350-1120 Fuel Fill Hose?

The MPI 350-1120 Fuel Fill Hose has a 1-1/2-inch interior diameter, two-ply synthetic fabric construction, and a 90-pound burst pressure. It is specified for fuel fill use with gasoline or diesel on pleasure boats only.

Can the MPI 350-1120 Fuel Fill Hose be used for gasoline and diesel fuel?

Yes. The MPI Marine Products 350-1120 Fuel Fill Hose is specified for fuel fill applications involving either gasoline or diesel. It is intended for pleasure boats only and is designed to resist gasoline and alcohol blends.

California Residents: WARNING Cancer and Reproductive Harm - P65Warnings.ca.gov