Quicksilver Premium Plus 2-Stroke Synthetic Marine Oil

Quicksilver Premium Plus 2-Stroke Synthetic Marine Oil

The synthetic blend of Premium Plus Quicksilver oil features an advanced formula specially designed for all 2-stroke outboard engine applications. More specifically, the oil was created to meet the challenging demands of high horsepower engines. Quicksilver oil is blended with high-quality ash-free dispersants. The advanced formula helps to maintain peak engine performance in even the most severe conditions including extended full throttle, high speed, heavy load, and "out-of-the-hole" acceleration.

Wholesale Marine recommends the use of this oil in oil-injected, carbureted, or electronic fuel injected (EFI) mid- to high-horsepower engines such as Mercury, Mariner, and Force Outboards; Mercury Jet Drives and Mercury Sport Jet engines. 

Features:

• A much stronger performance compared to in-house test standards, which are even more stringent than the industry’s TC-W3 standard.
• Outstanding wear corrosion protection, which significantly helps extend engine life.
• A clean burn that reduces performance-reducing carbon build-up in the exhaust system.
• Helps to maintain peak engine performance and overall reliability.
• Meets all outboard and personal watercraft manufacturers' recommendations for use of TC-W2 and TC-W3 oils in pre-mix or oil-injected 2-cycle applications.
• Provides warranty protection for Mercury, Mariner, Force and Sport Jet and M2 Jet Drive 2-cycle engines.

Sizes Available:

• Quart
• Gallon
• 2-1/2 Gallon

Quicksilver Premium Plus Fuel Mixing Chart

Frequently Asked Questions

What is Quicksilver Premium Plus 2-Stroke Synthetic Marine Oil used for?

Quicksilver Premium Plus 2-Stroke Synthetic Marine Oil is a synthetic-blend lubricant designed for 2-stroke outboard engines, including applications that operate under extended full throttle, high speed, heavy loads, and demanding acceleration. Its formula is designed to help maintain engine performance and reliability in severe operating conditions.

Which 2-stroke marine engines can use Quicksilver Premium Plus oil?

The product is designed for all 2-stroke outboard engine applications and is recommended for oil-injected, carbureted, or EFI mid- to high-horsepower engines. The description specifically identifies Mercury, Mariner, and Force outboards, as well as Mercury Jet Drive and Sport Jet engines.

Can Quicksilver Premium Plus 2-Stroke Synthetic Marine Oil be used for pre-mix and oil-injected applications?

Yes. Quicksilver Premium Plus oil is recommended for both pre-mix and oil-injected 2-cycle applications. The product description states that it meets manufacturer recommendations for use of TC-W2 and TC-W3 oils in these applications.

What does Quicksilver Premium Plus 2-Stroke Synthetic Marine Oil help protect against?

The oil provides wear and corrosion protection while using ash-free dispersants to support a clean burn. Its formula also helps reduce carbon buildup in the exhaust system, helping maintain engine performance and reliability.

What fuel-to-oil mixing ratios are listed for Quicksilver Premium Plus oil?

The supplied fuel mixing chart lists 16:1, 25:1, 50:1, and 100:1 gas-to-oil ratios. For example, the chart specifies 8 ounces of oil per gallon at 16:1, 5 ounces at 25:1, 3 ounces at 50:1, and 1.5 ounces at 100:1. Use the ratio applicable to your engine's requirements.

What sizes are available for Quicksilver Premium Plus 2-Stroke Synthetic Marine Oil?

Quicksilver Premium Plus 2-Stroke Synthetic Marine Oil is available in quart, gallon, and 2-1/2 gallon sizes. The amount of oil required varies by engine, so verify your engine's oil capacity and applicable requirements before use.

How much oil does my engine need?

It varies model to model, check out our Engine Oil Capacity Guide for more information and capacity charts!

California Residents: WARNING Cancer and Reproductive Harm - P65Warnings.ca.gov