Shrink Wrap International Boat Shrink Wrap Heat Gun

Shrink Wrap International Boat Shrink Wrap Heat Gun

This Shrink Wrap International deluxe boat shrink wrap heat gun provides a lightweight but powerful propane fueled heat source. Through the use of the trigger, this boat shrink wrap heat gun can put out 341,000 BTU's at maximum power but is variable from 10,000 BTU's. This shrink wrap heat gun comes with a trigger handle, a 25' hose, 60 PSI fixed regulator,, and a 341,000 BTU Titanium nozzle on a 15-3/4" neck. This complete shrink wrap torch is lightweight, coming in at 1.4 lb for the handle, extension, & nozzle.

Features:

• Lightweight
• Propane Fueled Heat Source
• Adjustable Heat Up To 341,000 BTU's
• Ease Of Control
• Variable From 10,000 BTU's Through Use Of Trigger

Includes:

• Quick Disconnect Handle
• 15-3/4" Neck
• 60 PSI Fixed Regulator
• 341,000 BTU Titanium Nozzle
• 25' Hose

Instructions:

1. Attach the regulator to the propane tank
2. While leaving the propane off, attach the other end of the hose to the torch.
3. Turn the propane tank all the way on
4. Turn the torch regulator on just enough to be able to barely hear gas coming out
5. Light the torch, if it does not light right away, give it a little more gas. This is called the pilot light, it will stay burning as long as you are using the torch
6. Leave the flame just high enough so it does not blow out when pulling the trigger

When shrinking be sure to let go of the trigger when you stop or starting to go into another direction. Do NOT ever shrink where you cannot see the flame. Plastic can ignite.

Frequently Asked Questions

What is the Shrink Wrap International Boat Shrink Wrap Heat Gun used for?

The Shrink Wrap International Boat Shrink Wrap Heat Gun provides a propane-fueled heat source for boat shrink wrapping. Its trigger allows the heat output to be varied from 10,000 BTU to a maximum of 341,000 BTU, giving users control over the heat applied during the shrinking process.

How much heat output does this boat shrink wrap heat gun provide?

The heat gun provides variable output from 10,000 BTU up to 341,000 BTU. The trigger is used to control the heat output, while the 341,000 BTU titanium nozzle provides the maximum rated output.

What is included with the Shrink Wrap International Boat Shrink Wrap Heat Gun?

The complete shrink wrap torch includes a quick disconnect handle, 15-3/4-inch neck, 60 PSI fixed regulator, 341,000 BTU titanium nozzle, and 25-foot hose. The handle, extension, and nozzle together weigh approximately 1.4 pounds.

How do you start the Shrink Wrap International Boat Shrink Wrap Heat Gun?

Attach the regulator to the propane tank and connect the hose to the torch while the propane is off. Turn the propane tank fully on, open the torch regulator slightly, and light the torch. Adjust the flame so it remains lit when the trigger is pulled.

What safety precautions should be followed when using this boat shrink wrap heat gun?

Always keep the flame visible while shrinking. Release the trigger when stopping or changing direction, and never shrink in an area where the flame cannot be seen. The product instructions warn that plastic can ignite, so the flame should be monitored throughout use.

California Residents: WARNING Cancer and Reproductive Harm - P65Warnings.ca.gov