Sierra ShieldsFlex II Marine Water/Exhaust Hose 3" x 6-1/4'

Sierra ShieldsFlex II Marine Water/Exhaust Hose w/ Wire - 3" x 6-1/4'

Shieldsflex II Marine Water/Exhaust Hose has a black synthetic rubber tube and cover. It is reinforced with wire helix imbedded between plies of HD synthetic cord. It is resistant to exhaust fumes, ozone, mild chemicals, antifreeze and saltwater. This hose is abrasion and odor permeation resistant. It now has double the ozone resistance required by the SAEJ2006. Shieldsflex II is primarily used for engine intake, wet exhaust connections (use where bends or long lengths are required), bilge pump intake/discharge, scupper lines, toilet intake/discharge, and holding tank vent/pump out. The temperature ranges from -20° F – +200°F continuous, +250°F intermittent. The hose meets SAE J2006 Type R2 standards.

Features:

• Black synthetic rubber tube and cover
• Reinforced with wire helix embedded between plies of HD synthetic cord
• Abrasion and odor permeation resistant
• Resistant to exhaust fumes, ozone, mild chemicals, antifreeze and saltwater
• Meets SAEJ2006 Type R2 standards

Specifications:

• I.D.: 3" or 76mm
• O.D.: 3 7/16" or 87mm
• Ply: 2
• Wt. "C": 177
• Bend Radius: 5 x I.D.

• Burst Pressure: 220 PSI

• Working Pressure: 75 PSI

Frequently Asked Questions

What is the Sierra ShieldsFlex II Marine Water/Exhaust Hose w/ Wire 3" x 6-1/4' used for?

The Sierra ShieldsFlex II Marine Water/Exhaust Hose is designed for several marine applications, including engine intake, wet exhaust connections where bends or long lengths are required, bilge pump intake and discharge, scupper lines, toilet intake and discharge, and holding tank vent or pump-out systems.

What is the Sierra ShieldsFlex II Marine Water/Exhaust Hose made from?

This hose features a black synthetic rubber tube and cover reinforced with a wire helix embedded between plies of high-density synthetic cord. The construction provides resistance to abrasion and odor permeation while helping the hose withstand marine service conditions.

Is the Sierra ShieldsFlex II Marine Water/Exhaust Hose resistant to saltwater and chemicals?

Yes. The hose is resistant to exhaust fumes, ozone, mild chemicals, antifreeze, and saltwater. It is also designed to provide increased ozone resistance and has double the ozone resistance required by SAE J2006.

What are the temperature and pressure ratings for this 3" marine hose?

The Sierra ShieldsFlex II hose has a temperature range of -20°F to +200°F continuously and +250°F intermittently. The 3" hose has a burst pressure of 220 PSI and a working pressure of 75 PSI.

What are the dimensions of the Sierra ShieldsFlex II 3" x 6-1/4' hose?

This hose has a 3" inside diameter and 3 7/16" outside diameter. It is 6-1/4' long, has a bend radius of 5 times the inside diameter, and uses a two-ply construction.

What marine standard does the Sierra ShieldsFlex II hose meet?

The Sierra ShieldsFlex II Marine Water/Exhaust Hose meets SAE J2006 Type R2 standards. Its construction is intended for marine water and exhaust applications where resistance to exhaust fumes, ozone, saltwater, mild chemicals, antifreeze, abrasion, and odor permeation is required.

California Residents: WARNING Cancer and Reproductive Harm - P65Warnings.ca.gov