Bennett 18" x 12" BOLT Electric Trim Tab Kit

Bennett BOLT1812 18" x 12" BOLT Electric Trim Tab Kit

Bennett Marine has been leading the way in electric trim tabs since 1960 and is trusted by the leading boat builders for over half a century. Founded on the principles of quality and service Bennett electric trim tab systems are some of the best on the market today.

The Bennett Bolt trim tabs have been designed to outperform and outlast any other trim tab system on the market. The Bolt system uses states of the art technology and cutting-edge advances to manufacture a superior system. Common in outdated technology, the Bennett BOLT electric trim tab sets have developed technology that reduces water intrusion and common part malfunctions.

Bennett electric trim tab systems are designed for flatboats, center console, dual console, deck boats, bowriders, bass boats, and runabouts and are more suitable for single actuator use and for trailered boats 26 to 36 feet. When selecting the right size Bennett BOLT trim tab system, keep in mind the span is the side-to-side measurement and the chord is the fore-to-aft measurement.

NOTE: Bennett Electric Trim Tab sizes are in format span x chord. Span is the side to side measurement, chord is the fore to aft measurement.

Trim Tab Dimensions:

• Width: 18"
• Depth: 12"

Features:

• Wires are threaded through the upper hinge so no wires are exposed to the marine environment. This adds protection and safety.
• Water-tight black nylon actuator offers trouble-free operation.
• Main seal has been placed high to protect against marine growth and water intrusion failures.
• Runs quieter than competitors’ products.
• Installation is fast- the actuator does not require disassembly.
• Lifetime warranty for electric actuators
• Solidly constructed for a long service lifespan
• Bennett Part#: BOLT1812
• Yamaha Part#: 6BT-50013-47-00

What's Included:

• (2) BEA2000 12-volt trim tab actuators
• (2) Stainless steel trim planes and mounting plates.
• (2) 20 ft harnesses with waterproof connectors.
• 6ft. wire harnesses and waterproof connectors.

SWITCH SOLD SEPARATELY

Click here to download Bennett BOLT1812 18" x 12" BOLT Electric Trim Tab Kit Installation Instructions

Frequently Asked Questions

What is the Bennett BOLT1812 18" x 12" BOLT Electric Trim Tab Kit designed for?

The Bennett BOLT1812 Electric Trim Tab Kit is designed for flatboats, center consoles, dual consoles, deck boats, bowriders, bass boats, and runabouts. This 18" x 12" system is intended for trailered boats 26 to 36 feet in length.

What are the trim tab dimensions of the Bennett BOLT1812?

The Bennett BOLT1812 trim tabs measure 18 inches wide by 12 inches deep. Bennett defines span as the side-to-side measurement and chord as the fore-to-aft measurement when specifying electric trim tab sizes.

What is included with the Bennett BOLT1812 Electric Trim Tab Kit?

The kit includes two BEA2000 12-volt trim tab actuators, two stainless steel trim planes and mounting plates, two 20-foot harnesses with waterproof connectors, and 6-foot wire harnesses with waterproof connectors. The trim tab switch is sold separately.

How are the wires protected on the Bennett BOLT1812 trim tab actuators?

The actuator wires are threaded through the upper hinge, keeping them concealed and protected from the marine environment. The water-tight black nylon actuators also feature a main seal positioned high to help protect against marine growth and water intrusion failures.

Does the Bennett BOLT1812 require actuator disassembly during installation?

No. The Bennett BOLT1812 is designed for fast installation without requiring the actuator to be disassembled. The supplied system includes the trim planes, mounting plates, actuators, and wiring harnesses, while the switch is sold separately.

California Residents: WARNING Cancer and Reproductive Harm - P65Warnings.ca.gov