Bennett 18" x 12" Hydraulic Trim Tab Kit w/ All-in-One Control

Bennett 1812OBI 18" x 12" Hydraulic Trim Tab Kit w/ All-in-One Control

Bennett's line of hydraulic trim tabs are known for their power, precision, and durability. This hydraulic trim tab kit allows you to get the most from your boat, no matter what the load, speed, or water conditions. Bennett trim tabs get your boat on plane quickly, which gets rid of hull drag and allows your boat to use less fuel. Trim tabs can also be used to correct uneven loads on your boat. 

This Trim Tab Kit includes two Bennett Hydraulic Actuators. These actuators are strong, flexible nylon/fiberglass hydraulic cylinders that push the tabs into position. All hydraulic lines and wires are internal, concealed by the upper hinge, so they're not exposed to harsh environments.

Also included is Bennett's All-in-One Indicator Control. This user-friendly helm control is designed to be a stand-alone unit that's easy to install and operate. This control is equipped with convenient "All Up" and "All Down" buttons, and has auto tab retraction so your tabs retract up when the ignition is powered off.

Trim Tab Planes:

• Width: 18"
• Depth: 12"

Features:

• Includes All-in-One Indicator Control Unit
• Get om plane fast, and stay on plane at intermediate speeds
• Correct listing and uneven loads
• Improve visibility and safety
• Reduce pounding and eliminate porpoising
• Low maintenance, long-term value, and ease of service
• Exclusive transom mount interlocking tab design
• Riveted angle tab style
• Bennett Part#: 1812OBI
• Yamaha Part#: 6BT-50110-90-00

Complete Hydraulic Trim Tab Kit Includes:

• (2) Trim plane assemblies
• (2) A1101A Hydraulic trim tab actuators
• (1) V351HPU1 Hydraulic power unit
• Hydraulic tubing and hardware
• All-in-One Indicator Control

Bennett Hydraulic Trim Tabs are backed by a limited lifetime warranty. The All-in-One control is backed by a 3 year warranty.

Basic System Diagram:

The Bennett OBI9000H All-in-One Indicator Control has been designed to accommodate new installations, as well as common retrofit installations. Be sure to read the full instructions to determine which items you will need.

 Click here to download Bennett 1812OBI 18" x 12" Hydraulic Trim Tab Kit w/ All-in-One Control Installation Instructions

Frequently Asked Questions

What is the Bennett 1812OBI Hydraulic Trim Tab Kit designed to do?

The Bennett 1812OBI Hydraulic Trim Tab Kit helps a boat get on plane quickly and stay on plane at intermediate speeds. The trim tabs can also correct listing and uneven loads, improve visibility and safety, and reduce pounding and porpoising.

What size trim tabs are included with the Bennett 1812OBI kit?

The Bennett 1812OBI includes two trim plane assemblies measuring 18 inches wide by 12 inches deep. The kit also includes two A1101A hydraulic actuators that push the trim tabs into position.

What is included with the Bennett 1812OBI Hydraulic Trim Tab Kit?

The complete kit includes two trim plane assemblies, two A1101A hydraulic trim tab actuators, one V351HPU1 hydraulic power unit, hydraulic tubing, hardware, and an All-in-One Indicator Control.

What does the All-in-One Indicator Control do?

The included All-in-One Indicator Control is a stand-alone helm control with convenient "All Up" and "All Down" buttons. It also provides automatic tab retraction, raising the trim tabs when the boat's ignition is powered off.

How are the hydraulic actuators on the Bennett 1812OBI protected?

The Bennett 1812OBI hydraulic actuators use internal hydraulic lines and wires concealed by the upper hinge. This keeps the lines and wires from being exposed to harsh marine environments while the actuators push the trim tabs into position.

What warranty is included with the Bennett 1812OBI Hydraulic Trim Tab Kit?

The Bennett hydraulic trim tabs are backed by a limited lifetime warranty. The included All-in-One Indicator Control is backed by a 3-year warranty.

California Residents: WARNING Cancer and Reproductive Harm - P65Warnings.ca.gov