Bennett 9" x 12" BOLT Electric Trim Tab Kit - Edge Mount

Bennett BOLT912ED 9" x 12" BOLT Electric Trim Tab Kit - Edge Mount

Bennett Trim Tab sizes are in format span x chord. Span is the side to side measurement, chord is the fore to aft measurement.

The Bennett BOLT Edge Mount Trim Tab Set is designed with an adjustable upper hinge for transoms with limited vertical space. Tabs turn up for added strength and feature piano-hinged backing plates.

Compared to other electric systems using old technologies designed over twenty years ago, the BOLT Electric combines cutting-edge technology with a robust and water-tight actuator. This new "superior by design" technology resolves the issues that older systems have with breaking apart and water intrusion caused by design flaws and marine growth.

Electric trim tab systems are suitable for:

• Trailered boats 17-28 ft.
• Single actuator use, due to the inability to synchronize two electric actuators on the same tab.

Trim Tab Dimensions:

• Width: 9"
• Depth: 12"

Features:

• Requires less than 6.5" of vertical transom space to install.
• Wires are concealed and protected through the upper hinge = there are no exposed wires to the marine environment.
• Robust, water-tight black nylon actuator provides trouble-free operation.
• Main seal located high to protect against marine growth and water intrusion failures.
• Quieter than any other system on the market - No more scaring the fish away!
• Installation is fast - no need to disassemble parts of the actuator.
• 5 Year Manufacturer's Warranty
• Bennett Part#: BOLT912ED
• Yamaha Part#: 6BT-50013-54-00

What's Included:

• (2) BEA2000 12-volt trim tab actuators
• (2) Stainless steel trim planes and mounting plates.
• (2) 20 ft harnesses with waterproof connectors.
• 6ft. wire harnesses and waterproof connectors.

Click here for Bennett BOLT912ED 9" x 12" BOLT Electric Trim Tab Kit Installation Instructions

Frequently Asked Questions

What is the Bennett BOLT912ED Edge Mount Electric Trim Tab Kit designed for?

The Bennett BOLT912ED Edge Mount Electric Trim Tab Kit is designed to help improve boat ride quality, handling, and performance on trailered boats from 17 to 28 feet. Its edge mount design is especially useful for boats with limited vertical transom space.

What makes the Edge Mount design different?

The Edge Mount design uses an adjustable upper hinge for transoms with limited vertical space and requires less than 6.5" of vertical transom space to install. The tabs also turn up for added strength and feature piano-hinged backing plates.

What is included with the Bennett BOLT912ED trim tab kit?

This kit includes two BEA2000 12-volt trim tab actuators, two stainless steel trim planes and mounting plates, two 20’ harnesses with waterproof connectors, and 6’ wire harnesses with waterproof connectors.

Is a trim tab switch included with this kit?

No. The Bennett BOLT912ED trim tab kit is sold without a switch, and the switch is sold separately.

What size are the trim tabs in the Bennett BOLT912ED kit?

The trim tabs in this kit measure 9" wide by 12" deep. Bennett trim tab sizing is listed as span by chord, where span is the side-to-side measurement and chord is the fore-to-aft measurement.

California Residents: WARNING Cancer and Reproductive Harm - P65Warnings.ca.gov