Total Price:
Add to CartBlue Sea Systems L-Series Solenoid Switch 12-24V
Features:
| Specifications | |
|---|---|
Control Circuit Connection  |
Tinned Wire |
| Nominal Voltage | 12V DC 24V DC |
| Coil Function |
Normally Open |
| Mounting | #10 |
| Operating Amperage Current | 3.6A when changing state |
| Amperage Operating Current continuous | 0.13A @ 12 V 0.07A @ 24 V |
| Continuous Rating |
250A 300A 400A 450A |
| Intermittent Rating |
275A (5 min) 400A (5 min) 500A (5 min) 600A (5 min) |
| Contact Form | SPST-NO |
| Cranking Rating 30 sec | 1,000A |
| Input Voltage | 8.5-36V DC |
| Inrush Rating: 0.25 sec (10 repeats) | 2000A |
| Switching Cycles | 1,000,000 |
| Terminal Stud | Serrated Flange Nut |
| Terminal Stud Length | 0.66in (16.76 mm) |
| Terminal Stud Size | 5/16" (M8) |
| Terminal Stud Torque | 80 in-lb (9.04 Nm) |
| Wire Leads | 20 AWG |
| Weight | 1.00lb (0.45 kg) |
What is the Blue Sea Systems L-Series Solenoid Switch 12-24V used for?
The Blue Sea Systems L-Series Solenoid Switch 12-24V can function as a remote battery switch. It is activated by a low-amperage ON-OFF switch mounted anywhere and is designed for 12V or 24V systems.
Is the Blue Sea Systems L-Series Solenoid Switch suitable for gasoline-powered boats?
Yes. The Blue Sea Systems L-Series Solenoid Switch has ignition-protected, hermetically sealed contacts and is vaporproof. It is designed to be safe for installation aboard gasoline-powered boats.
What voltage and current specifications does the Blue Sea Systems L-Series Solenoid Switch have?
The solenoid switch accepts an input voltage of 8.5-36V DC and is designed for 12V or 24V systems. Its continuous operating current is 0.13A at 12V and 0.07A at 24V, with 3.6A drawn when changing state.
What are the current ratings of the Blue Sea Systems L-Series Solenoid Switch?
The Blue Sea Systems L-Series Solenoid Switch is available in continuous ratings of 250A, 300A, 400A, and 450A. Its listed intermittent ratings range from 275A to 600A for 5 minutes, depending on the rating.
How is the Blue Sea Systems L-Series Solenoid Switch controlled?
The Blue Sea Systems L-Series Solenoid Switch uses a normally open SPST contact form and can be activated by a low-amperage ON-OFF switch. Its integrated coil control helps minimize heating and amperage draw during operation.
What are the terminal and mounting specifications for the Blue Sea Systems L-Series Solenoid Switch?
The solenoid uses a 5/16-inch (M8) terminal stud with a serrated flange nut and a maximum terminal stud torque of 80 in-lb (9.04 Nm). The terminal stud is 0.66 inches (16.76 mm) long, and mounting uses #10 hardware.
California Residents: 
WARNING
Cancer and Reproductive Harm -
P65Warnings.ca.gov
Blue Sea "M" Series Battery Switch - 3-Position This Blue Sea "M" Series Battery Switch - 3-Position is ignition protected making it safe for installation aboard gasoline powered boats. It switches...
Blue Sea WeatherDeck Toggle Switch Blue Sea WeatherDeck Toggle Switch is made from durable nickel played brass and phenolic non-corrosive construction to hold up in marine environments...
Choose Options
Blue Sea Systems 12 Volt Plug This durable 12 Volt Plug from Blue Sea Systems is designed to withstand the rigors of wet environments and constant vibration. Features a moisture proof sealing ring...
Blue Sea Systems e-Series Single Circuit ON-OFF Switch Features: Ignition protected - safe for installation aboard gasoline powered boats Case design allows surface or rear panel mounting Meets...
Blue Sea Systems e-Series Battery Switch Selector- 4 Position Features: Make-before-break contact design allows switching between battery banks without power interruption Ignition protected -...
