Boat Hardware & Tools

Sea Dog Stainless Steel "U Bolt" Bow - Transom Eye Sea Dog bow eyes are constructed of corrosion resistant machined 304 stainless steel and come with adjustable finish nuts which provide superior performance over crimp ring style bow eyes. For use as a...

Taylor Windshield Support Bar Used as original equipment on many fine walkthru windshields. Windshield support bars are made from anodized aluminum tubing with nylon fittings. The fittings allow for pivot in almost every direction for easy installation...

Sea-Dog Rub Strake Durable and corrosion resistant, these Sea Dog Rub Strakes are designed to protect your boat's dock, fender, and anchor lines by preventing chafing from cap rails, gunwales, ect. Stamped 304 Stainless Steel Construction 3/4"...

You can still clip towels, wet shirts or any other fabric to your bimini top. Equally strong to the classic Biminiclips, it too will hold on in windy conditions. The biminiclip square is made from polycarbonate and will fit a 1" square tubing.

Taylor Windshield Screw Cover Foam Taylor's PVC based foam has been used on many fine original equipment windshields.

Stainless Steel Windshield Mount Snap Fastener 4pk For 3/4" or 7/8" trim. Stud portion affixed (to the clip).

Clip towels, wet shirts or any other fabric to your bimini top. Strong and durable Biminiclips holds on in windy conditions or while underway up to 50 mph. Easy removal, just pull up on one side to pull off and molded ABS for UV Resistance Classic...

Beckson 3.5" X 12" Self-Adhesive Non-Skid Step Pad This item has been discontinued by the manufacturer and is no longer available.  This Beckson Self-Adhesive Non-Skid Step Pad is self-adhesive and easily cut for a custom fit. A heavy-duty 3"...

Sea Dog Stud Mount Flanged Grab Rail Formed 304 Stainless Finish 7/8" OD Tube 5/16" - 18 Nut Available in 4 Sizes Part # A B C Finish Tube O.D...

Beckson 8" Deck Plate- Screw Out- Diamond Texture Beckson has added an 8 inch screw out deck plate to our line of premier quality deck and access plates. This plate operates just like the Beckson industry standard 4" and 6" screw out deck plates. It is...

Sea Dog Marine Stainless Impeller Puller Comparable to Jabsco #50070-0040 and #50070-0200. Allows easier removal of flexible impellers from pumps. Tighten the side grips onto the impeller hub and turn the center screw shaft to pull the impeller out of...

Beckson 8" Deck Plate - Pry Out- Diamond Texture Beckson developed the first pry-out deck plate as an access cover to its permanently mounted pump. These pry-out plates were designed with an extra heavy O-ring to assure a water tight fit. The Diamond...

Beckson 6" Deck Plate- Screw Out- Diamond Texture Though deck plates are no new invention, Beckson was the first to conquer all three safety features. First, a cover that would not open unexpectedly. Second, maximum water tightness. Third, prevent...

Sea-Dog Closed Base Aluminum Cleat This Sea Dog closed base cleat features die-cast aluminum construction with a large base that distributes heavy loads evenly.  Features: Designed for use on docks or aluminum vessels Countersunk for FH...

Beckson developed the first pry-out deck plate. These plates were designed with an extra heavy O-ring to assure a water tight fit. This model of plates has a non-skid raised dimple center. Pry-out plates should be installed in areas where internal...

Sea-Dog Chrome 4 Bolt Hollow Base Cleat These die cast chrome plated zinc cleats are an economical choice for freshwater applications. This cleat is designed to keep lines snugly secured. Easy surface mount installation with (4) FH fasteners (not...

 Sea-Dog Injection Molded Nylon Heavy Duty Cleat Sea Dog heavy duty, injection molded nylon tie-down clears are corrosion and UV resistant. Durable and easy to install, these cleats only require (2) FH fasteners to install (not included)...

Beckson 6" Deck Plate- Screw Down Though deck plates are no new invention, Beckson was the first to conquer all three safety features. First, a cover that would not open unexpectedly. Second, maximum water tightness. Third, prevent jamming closed or...

Beckson Smooth 4" Screw-Out Marine Deck Plate The Beckson Smooth 4" Screw-Out Plate is designed to provide access with a single start non-jamming, self-cleaning, extra strong buttress thread, without the use of tools. With a patented back-up sealing...

Sea Dog Stainless Steel Open Base Boat Cleat Sea Dog 316 Stainless Steel Open Base Cleats provide easy line tie-off and corrosion resistance in a classic style. Four thru-bolts are required for installation (not included). Dimensions: Part...