Bob's Machine Action Series Jack Plate - Black Powder Coat

Bob's Machine Action Series Jack Plate - Black Powder Coat

Bob’s Machine Action Series Jack Plate with black powder coat finish is built for boaters who want strong hydraulic lift, fast response, and a clean, blacked-out rigging look. Designed for modern outboards up to 300 HP and over 625 lbs, this plate delivers approximately 7.5" of total lift to improve holeshot, shallow-water performance, and overall efficiency.

This model uses the proven Action Series integrated pump design, with the hydraulic pump housed inside the jack plate itself. That saves space inside the boat, reduces rigging clutter, and simplifies installation compared to systems with a separate pump mounted in the bilge. The black powder coat finish adds a durable, corrosion-resistant coating that pairs perfectly with today’s black outboards and accessories.

Key Benefits

• Stronger holeshot and lift – 1.5" of built-in lift plus 6" of hydraulic travel (about 7.5" total) helps your boat get on plane faster, carry heavy loads, and run at the right attitude.
• Cleaner rigging with internal pump – The hydraulic pump is built into the jack plate, freeing up interior space and eliminating the need to mount a separate pump and run long hydraulic lines.
• Improved shallow-water and rough-water control – Raise the engine for skinnier water or lower it for more bite and stability in chop, all from the helm with push-button hydraulic control.
• Durable black powder coat finish – The black coating adds an extra layer of protection while giving your transom a sleek, factory-custom look.
• Made in the USA – Built in Bob’s Machine Shop’s facility with the same attention to detail that has made their jack plates a favorite among serious anglers and performance boaters.

Action Series Design & Performance

The Action Series is a one-piece jack plate that does not require setback spacers to reach common setback dimensions. It is available in multiple setback options to match a wide range of hulls, and can support outboards with mounting widths up to approximately 14.5". For wider motors, Bob’s recommends stepping up to their Extreme Gen3 series.

A large, powerful hydraulic motor provides quick, smooth travel even under load, so engine height changes feel responsive without sacrificing control. Automotive-style grease nipples in the side rails and tension rods in the frame help maintain alignment and make it easy to keep the sliding surfaces lubricated.

Compatible Boats & Applications

Bob’s Machine Action Series Jack Plate - Black Powder Coat is a great fit for:

• Bass boats and tournament rigs
• Bay and inshore fishing boats
• Multi-species and walleye boats
• Other outboard-powered hulls that benefit from setback and adjustable engine height

It’s ideal for boaters who want on-the-fly engine height adjustment, improved shallow-water capability, and better speed and efficiency from a properly tuned engine height—all with a stealthy black powder-coated finish.

What’s Included

Each Bob’s Machine Action Series Jack Plate - Black Powder Coat package typically includes:

• Action Series hydraulic jack plate assembly with black powder coat finish and integrated pump
• Wiring harness and relays
• Dash-mounted rocker switch
• Installation and warranty documentation

Note: Transom and engine mounting bolts are usually not included. Use marine-grade stainless steel hardware sized for your specific transom thickness and engine mounting requirements.

Installation & Fitment Notes

The integrated pump design streamlines rigging and frees up interior space, but installation still requires safely lifting and supporting the outboard, aligning the jack plate on the transom, and properly torquing all mounting hardware. Many owners choose to have a qualified marine technician perform the install, especially with larger engines.

This jack plate is engineered for outboards rated up to 300 HP and over 625 lbs, with support for engine mounting widths up to about 14.5". For engines with wider mounting patterns, consider Bob’s Extreme Gen3 series for proper fit and capacity. Always review the installation manual, verify the recommended setback for your hull, and confirm engine/boat compatibility before purchase.

Bob's Machine Action Series Jack Plate - Black Powder Coat FAQs

What size engines is the black powder coat Action Series jack plate designed for?

The Bob’s Machine Action Series Jack Plate with black powder coat finish is designed for modern outboards and is commonly rated for engines up to approximately 300 HP and over 625 lbs of engine weight, depending on the specific model and setback. Always confirm the exact horsepower and weight ratings in the specifications and compare them with your outboard manufacturer’s recommendations.

How is the black powder coat version different from the standard Action Series jack plate?

The black powder coat Action Series jack plate uses the same integrated hydraulic pump design, lift range, and overall construction as the standard aluminum-finish Action Series. The key difference is the durable black powder coat finish, which provides a blacked-out appearance and an additional layer of protection against the elements to better match modern black outboards and rigging.

What is the advantage of the integrated pump design?

Unlike systems that mount the hydraulic pump inside the boat, the Action Series houses the pump inside the jack plate itself. This saves space inside the boat, reduces rigging clutter, and simplifies installation by eliminating the need to mount a separate pump and run long hydraulic lines or hoses to the transom area.

Is the black powder coat Action Series jack plate suitable for saltwater use?

Yes. Bob’s Machine Action Series jack plates are built from high-quality materials and marine-grade components and can be used in both freshwater and saltwater environments. The black powder coat finish adds an additional protective layer, but as with any equipment used in saltwater, rinsing with fresh water after use and performing regular inspection and maintenance will help maximize service life.

How do I choose the right setback for my boat?

Setback is the distance the engine is moved rearward from the transom. Smaller setbacks are often used on lighter, faster hulls, while larger setbacks can help heavier boats or rigs that benefit from extra lift and cleaner water flow to the prop. The best choice depends on your hull design, engine weight, running attitude, and how the boat is loaded. If you are unsure, check your boat manufacturer’s recommendations or consult a knowledgeable dealer or technician with your boat and engine details.

California Residents: WARNING Cancer and Reproductive Harm - P65Warnings.ca.gov