Turning Point Boat Propellers and Hub Kits
Turning Point manufactures aluminum and stainless-steel propellers for compatible outboards and sterndrives. Its product lineup includes three- and four-blade propellers in a variety of diameters, pitches, rotations, and gearcase applications.
Wholesale Marine carries Turning Point Hustler aluminum propellers, Express stainless-steel propellers, and MasterGuard hub kits. Selecting the correct combination requires more than matching horsepower. The engine manufacturer, model, gearcase size, propeller-shaft spline count, rotation, pitch, and propeller series must all be considered.
Turning Point Hustler Aluminum Propellers
Turning Point Hustler propellers offer an aluminum option for boaters replacing a damaged propeller or adjusting performance. Hustler models are available in three- and four-blade configurations across multiple engine and gearcase applications.
Turning Point uses a squeeze-casting process intended to create dense aluminum blades with a tighter grain structure than conventional die-cast construction. Hustler propellers also use Turning Point’s Ultracoat powder-coated finish for appearance and corrosion resistance. Features vary by model, so confirm the specifications of the individual propeller before ordering.
Hustler 13.25" x 17P Three-Blade Propeller
An aluminum three-blade propeller with a 13.25-inch diameter and 17-inch pitch. Engine fitment and the required hub kit must be confirmed separately.
Hustler 14" x 19P Four-Blade Propeller
An aluminum four-blade propeller intended for compatible applications where acceleration, load carrying, handling, or stern lift may be prioritized.
Turning Point Express Stainless-Steel Propellers
Turning Point Express propellers use stainless-steel construction for increased strength and durability. Stainless steel allows thinner, stiffer blade profiles that resist flexing under load, but it also costs more than aluminum and may transfer more impact force to other drivetrain components during a severe propeller strike.
Express propellers are available in three- and four-blade configurations, along with different diameters, pitches, and rotations. Some models use vented barrels to influence acceleration, but this feature should be confirmed on the individual product page.
Express 14.25" x 21P Three-Blade Propeller
A stainless-steel three-blade propeller with a 14.25-inch diameter and 21-inch pitch. Confirm the engine application, rotation, and required hub kit before purchasing.
Express 14" x 19P Four-Blade Propeller
A stainless-steel four-blade propeller for compatible outboard and sterndrive applications. Four blades can support acceleration and load carrying, but results vary by boat and engine setup.
Three-Blade vs. Four-Blade Turning Point Propellers
A three-blade propeller is often selected when top-end speed and general-purpose performance are priorities. A four-blade propeller adds blade area and may improve acceleration, grip, load carrying, low-speed planing, and handling in rough water. The tradeoff can include a change in engine speed or top-end performance.
Moving between three- and four-blade designs may require a pitch adjustment to keep the engine within its manufacturer-recommended wide-open-throttle RPM range. Blade count alone does not determine performance; pitch, diameter, cup, rake, hull design, boat weight, engine height, and gear ratio also affect the result.
Turning Point MasterGuard Hub Kits
Many Turning Point propellers use a separate MasterGuard hub kit to connect the propeller housing to the engine’s propeller shaft. The propeller and hub must both be compatible with the engine application and with each other. Do not select a hub kit using horsepower alone.
Turning Point MasterGuard hubs use a one-piece design with a glass-reinforced polymer cushion surrounding metal splines. The hub is intended to cushion drivetrain shock while providing a serviceable connection between the propeller and propeller shaft.
Cross-brand interchangeability is limited. Compatible Turning Point 500-series hub kits for 4.25- and 4.75-inch gearcases can interchange with applicable propellers designed for Mercury Flo-Torq II, Michigan Wheel XHS, and Solas Rubex systems. This does not mean every Turning Point hub kit fits every interchangeable-hub propeller.
How to Choose the Right Turning Point Hub Kit
Use our hub-kit guide to understand gearcase sizes, propeller compatibility, engine fitment, and the information needed to identify the correct MasterGuard kit.
How to Choose a Turning Point Propeller
Start with the engine manufacturer, model, horsepower, year or serial range, gearcase size, propeller-shaft spline count, and rotation. Next, record the current propeller’s diameter, pitch, blade count, material, and the engine’s wide-open-throttle RPM with the boat under its normal operating load.
If the current setup reaches the recommended RPM range and performs well, matching its specifications provides a useful starting point. If engine speed is too high or too low, or if acceleration, load carrying, or handling needs improvement, the pitch, blade count, or propeller design may need to change.
Use Wholesale Marine’s Boat Propeller Finder to narrow the available propellers and hub kits by engine. Always verify the product application and hub requirement before ordering.
Boat Propeller Resources
Understanding propeller specifications makes it easier to compare Turning Point options and recognize when a different design may improve your setup.
Boat Propeller Basics
Learn how pitch, diameter, blade count, rake, and other design characteristics affect engine RPM and boat performance.
Aluminum vs. Stainless-Steel Propellers
Compare purchase price, durability, repair considerations, blade stiffness, and performance when selecting a propeller material.
Shop Turning Point Propellers at Wholesale Marine
Wholesale Marine carries Turning Point Hustler aluminum propellers, Express stainless-steel propellers, and MasterGuard hub kits for compatible outboards and sterndrives. Use the Propeller Finder and application information to identify the correct combination for your engine and boating needs.
Turning Point Propeller FAQs
What is the difference between Turning Point Hustler and Express propellers?
Turning Point Hustler propellers are made from aluminum, while Express propellers are made from stainless steel. Hustler models generally have a lower purchase price, while Express models offer greater blade strength and resistance to flexing.
Do Turning Point propellers include a hub kit?
Many Turning Point propeller housings require a separately selected MasterGuard hub kit. Review the individual product description and use the engine application information to confirm whether a hub is included or must be purchased separately.
How do I find the correct MasterGuard hub kit?
Identify the engine manufacturer, model, horsepower, year or serial range, gearcase size, propeller-shaft spline count, and compatible Turning Point propeller series. Do not choose a hub kit based on horsepower alone.
Are MasterGuard hub kits compatible with other propeller brands?
Compatible Turning Point 500-series hub kits for 4.25- and 4.75-inch gearcases can interchange with applicable propellers designed for Mercury Flo-Torq II, Michigan Wheel XHS, and Solas Rubex systems. This compatibility does not apply to every MasterGuard kit or every propeller.
Should I choose a three-blade or four-blade Turning Point propeller?
Three-blade propellers are commonly selected for general-purpose use and top-end speed, while four-blade propellers may improve acceleration, grip, load carrying, low-speed planing, and handling. The best choice depends on the boat, engine, current RPM, load, and performance goals.