CMC PT-35 Hydraulic Tilt and Trim

T-H Marine CMC PT-35 Hydraulic Tilt and Trim

The CMC PT-35 Electric Hydraulic Tilt & Trim delivers precise boat handling for outboard motors up to 35 HP. This compact 24-pound unit features durable 6061-T6 extruded aluminum construction with stainless steel fasteners and generates 7,853 pounds of thrust through its electric hydraulic actuator. With 84 degrees of adjustment and a 5-1/2 inch setback, it enhances stability and performance while accommodating both clamp-on and bolt-on motors without adapters. The 11-inch motor mounting area and included wire assembly with toggle switch make installation straightforward. Backed by a one-year hydraulic warranty and five-year structural warranty.

Features:

• Rated for 35 HP and Smaller Motors
• 5-1/2" Set Back to Enhance Boat Stability and Performance
• 84 Degrees of Trim and Tilt
• 1/4" 6061-T6 Extruded Aluminum Construction with Stainless Steel Fasteners
• Electric Hydraulic Actuator Rated at 7853lbs. of Thrust
• Accommodates Clamp-on or Bolt-on Motors Without the Need of an Adapter
• Only Weights 24 Pounds

Included in the PT-35 Box:

• One hydraulic PT-35 unit
• One wire assembly with toggle switch
• One switch plate and rubber boot

Note: The inside dimension of the motor mounting area of the PT-35 is 11 inches.  Before ordering, please make sure that the maximum width of the clamp mounting feet and/or mounting bolts of the motor that must fit into this area does not exceed this 11 inch limit.  Refer to the transom view drawings. Mounting bolts are not included with the PT-35. New CMC PT-35 Power Tilt & Trim units are warranted by the manufacturer for one year from date of purchase against defects in workmanship and/or materials in the hydraulic system and five years from the date of purchase against defects in workmanship and/or material in the structure.

 Click to Download CMC PT-35 Hydraulic Tilt and Trim Owners Manual

California Residents: WARNING Cancer and Reproductive Harm - P65Warnings.ca.gov