HOW TO MOUNT GARELICK TELESCOPING OVER PLATFORM LADDER
Mounting Instructions
- Using the gudgeon as a template, mark the four bracket holes on the platform for drilling at desired location.
- Note: Make certain that the brackets are located on a strong, solid surface of the platform. If this is not possible, use a backing plate to make the platform strong enough for mounting.
- Drill the four marked holes with a suitable drill bit, making sure to keep the drill perpendicular to the platform’s surface.
- Mount the ladder to the platform with fasteners suitable for your particular installation.
- Periodically check fasteners for tightness and polish the stainless steel with a suitable marine grade polish to increase longevity.
Maintenance:
- Regular fresh water rinsing and periodic cleaning with a mild abrasive cleaner will help retain lustre and help reduce corrosion.
- Periodically check mounting hardware and re-tighten (due to normal boat operation).
Safety:
- Never operate your boat with the ladder in “down” position. Serious injury or damage to your boat or ladder may result.
Information sourced from the Garelick 19615 Mounting Instructions Technical Page
Installation Instructions
Retaining Strap Installation Instructions