Marine Exhaust Hoses

Sierra ShieldsFlex II Marine Water/Exhaust Hose w/ Wire - 3" x 6-1/4' Shieldsflex II Marine Water/Exhaust Hose has a black synthetic rubber tube and cover. It is reinforced with wire helix imbedded between plies of HD synthetic cord. It is...

Add to Cart

Sierra 18-720-2000 Exhaust Hose T-Bolt Band Clamp The Sierra 18-720-2000 Exhaust Hose T-Bolt Band Clamp is designed to fit Shields series 200, 250, and any application below the water line. Constructed from 316 Stainless Steel and is .25" thick x .75"...

Add to Cart

Sierra 18-2766 Exhaust Hose For use on Volvo Penta I/O Engines:  AQ200, 250, 270, 280, 280DP, 290, 290DP. Interchangeable with: Mallory 9-42700 Volvo Penta 834751

Add to Cart

Quicksilver 34765A-2 Exhaust Flapper Kit 3" Quicksilver replacement exhaust flapper kit. Application: For 3" (76 mm) O.D. exhaust outlets 1 Flapper in kit

Add to Cart

Sierra Exhaust Hose T-Bolt Band Clamp 2-1/2" The Sierra 18-720-2120 Exhaust Hose is designed to fit Shields series 200, 250, and any application below the water line. Band is 316 stainless steel and is .025 thick by .75 wide Includes an extra long...

Add to Cart

Sierra High Temperature EPDM Rubber Exhaust 90° Elbow 6" Specifications:  I.D.: 6" or 152.4mm A: 7" or 177.8mm B: 7" or 177.8mm C: 2.25" or 57.15mm T: 0.25" or 6.35mm Elbow: Ribbed

Add to Cart

Sierra High Temperature EPDM Rubber Exhaust 90° Elbow w/ Clamps 4" 4" 90 Degree EPDM Rubber Elbow with T-Bolt Clamps

Add to Cart

Sierra High Temperature EPDM Rubber Exhaust 90° Elbow 4" Specifications:  I.D.: 4" or 101.6mm A: 5.75" or 146.05mm B: 5.75" or 146.05mm C: 1.50" or 38.1mm T: 0.25" or 6.35mm

Add to Cart

Sierra Shieldsflex II 2 1/8" Water/Exhaust  Sierra's Shieldsflex II Marine Water/Exhaust Hose has a black synthetic rubber tube and cover. The Shieldsflex II is primarily used for engine intake, bilge pump intake/discharge, scupper lines...

Add to Cart

Sierra Reducing Hump Hose Coupler 6" x  5" Specifications: ID1: 6" or 152.4mm ID2: 5" or 127mm A: 6" or 152.4mm B: 7.5" or 190.5mm C: 2.12" or 53.85mm T: .25" or 6.35mm Maximum operating temperature 250°F...

Add to Cart

Sierra Shields #1600 Water/Heater Hose 1" x 50' Sierra Shields 1600 Water/Heater Hose has a good bend radius, fabric reinforced & has an EPDM tube & cover. It is resistant to mild chemicals, heat, cold, ozone, and saltwater...

Add to Cart

Sierra Shieldsflex II 1 1/8" Water/Exhaust Sierra's Shieldsflex II Marine Water/Exhaust Hose has a black synthetic rubber tube and cover. The Shieldsflex II is primarily used for engine intake, bilge pump intake/discharge, scupper lines...

Choose Options

Volvo Penta VOL-852839 Oil Hose

Add to Cart

Sierra Reducing Hump Hose Coupler 8" x  6" Specifications: ID1: 8" or 203.2mm ID2: 6" or 152.4mm A: 6" or 152.4mm B: 9.5" or 241.3mm C: 1.38" or 35.05mm T: .25" or 6.35mm Maximum operating temperature 250°F...

Add to Cart

Sierra Elbow 45° EPDM 4" Specifications: I.D.: 4" or 101.6mm A: 1.50" or 38.1mm B: 1.50" or 38.1mm C: 5.50" or 139.7mm T: 0.25" or 6.35mm  

Add to Cart

Sierra Elbow 45° EPDM 5" Specifications: I.D.: 5" or 127mm A: 1.62" or 41.15mm B: 1.62" or 41.15mm C: 5.25" or 133.35mm T: 0.25" or 6.35mm

Add to Cart

Sierra Elbow 45° EPDM 6" Specifications: I.D.: 6" or 152.4mm A: 2" or 50.8mm B: 2" or 50.8mm C: 6.50" or 165.1mm T: 0.25" or 6.35mm Elbow: Ribbed

Add to Cart

Sierra Elbow 45° EPDM 8" Specifications: I.D.: 8" or 203.2mm A: 2.25" or 57.15mm B: 2.25" or 57.15mm C: 8.25" or 209.6mm T: 0.37" or 9.40mm Elbow: Ribbed  

Add to Cart

Sierra Expandable Braided Sleeving 1/2" X 100' Sierra Braided Sleeving 1/2" X 100' designed to be cut with scissors. Specifications: Expandable Expansion Range: Minimum = 1/4" , Maximum = 3/4" Temperature...

Add to Cart

Sierra High Temperature EPDM Rubber Exhaust 90° Elbow 4" Specifications:  I.D.: 5" or 127mm A: 6" or 152.4mm B: 6" or 152.4mm C: 1.62" or 41.15mm T: 0.25" or 6.35mm .

Add to Cart