Mercury 8M0162829 25-115HP 4-Stroke Outboard Oil Filter

Mercury 35-8M0162829 FourStroke Outboard Oil Filter

Protect your Mercury FourStroke outboard with the OEM oil filter built specifically for its needs. The 35-8M0162829 oil filter provides optimal oil flow and contaminant removal to keep your engine running smoothly. Pair it with Mercury FourStroke oil for best results and long-term protection. Designed to Mercury’s exact specs, this filter supports consistent engine performance and helps extend lifespan through proper maintenance. Regular changes with this genuine part also help meet warranty requirements, making it a must-have for serious outboard care.

Application Information:

This oil filter is for the following applications: Mercury/Mariner 25 HP FourStroke (Carb MY2006 & prior), 30 HP FourStroke (3 cyl. MY2005 & prior), all 40-60 HP FourStroke outboards (MY1998 & newer) and all 75-115 HP FourStroke outboards (USA 1B366822 & prior, 2B094996 & newer).

• s/s part 35-8M0065104
• Replaces Part # 35-822626K04

Interchangeable with:

• Sierra: 18-7914

Mercury Oil Filter Installation Instructions:

1. Unscrew old filter and clean mounting base. Be sure old gasket is removed from mounting base
2. Apply a thin coat of oil to filter gasket. Make sure the gasket is seated properly in base of the filter
3. Screw on until the gasket contacts the base. Tighten 1 - 1-1/4 turn
4. Use an acceptable filter wrench if necessary. Do NOT exceed 1 - 1-1/4 turn
5. Refill crank case and run the engine while checking for leaks
6. Check oil level

California Residents: WARNING Cancer and Reproductive Harm - P65Warnings.ca.gov