Pettit Fiberglass Dewaxer is a special blend of solvents, formulated to cut through and remove mold release, grease, and previously applied waxes from the gelcoat. Can be used above and below the waterline. Fiberglass de-waxing is necessary because visible and invisible release agents remain on the hull from the manufacturing process. Since this product contains strong solvents, it should not be used on polyester resin that is not fully cured since softening of the resin may occur.
Specifications:
Click to Download Pettit Bottom Prep Fiberglass Dewaxer Instructions
California Residents: 
WARNING
Cancer and Reproductive Harm -
P65Warnings.ca.gov
Pettit Easypoxy (EZ-Poxy) High Gloss Topside Marine Paint There are a lot of choices when it comes to topside marine paints, however, Pettit is an industry leader in creating superior marine grade...
Choose Options
Pettit Protect Gray High Build Epoxy Barrier Primer Coat Pettit Protect Epoxy Primer is a heavy-duty, dual component epoxy coating best used where maximum resistance to fresh or salt water is a...
Add to Cart
Pettit 120 Brushing Thinner Pettit 120 Brushing Thinner is a general purpose thinner for thinning brushing enamels for easier application. Many paints when stored for some time before use will...
Add to Cart
Pettit Bio-Blue Marine Hull Surface Prep Bio-Blue Hull Surface Prep is a powerful blend of cleaning agents and silica grit that de-waxes, etches, cleans, and prepares bare fiberglass for painting...
Choose Options
Pettit EZ Prime High Build Topside Undercoater Pettit EZ Prime is a high-build formula that dries quickly and is easy to sand. This undercoater should be used as a base coat whenever the surface...
Add to Cart
Pettit Vivid Ablative Antifouling Boat Paint When it comes to bottom paints, Pettit leads the way in innovation and high-quality bottom paints. They are committed to providing their customers with...
Choose Options
Pettit Hydrocoat Waterbased Bottom Paint Pettit Hydrocoat is an eco-friendly water-based marine bottom paint that meets all local and state regulations. It is formulated with no harsh smells or...
Choose Options
Interlux Brightside - High Gloss Polyurethane Topside Marine Paint Brightside Polyurethane marine paint is a hard-finish, high gloss, one-part application polyurethane topside finish. This paint...
Choose Options
Interlux Interprotect Epoxy Barrier Coat Kit - Gray Applying Interlux 200E can help protect hulls from damaging water absorption that can cause long-term, costly repairs to your boat. Interprotect...
Add to Cart
Pettit EZ-Fair Two-Part Epoxy Fairing Compound EZ-Fair Epoxy Fairing Compound 7050 is a lightweight, two-part epoxy putty designed for filling and smoothing surface imperfections above and below the...
Choose Options
