Tempress Elite High Back Helm Seat

Tempress Elite High Back Helm Seat

Upgrade your boat's seating with the Tempress Elite Series High-Back Helm Seat. This seat incorporates Tempress' patented NaviStyle StylePanel system and ensures superior comfort and unequaled quality. By utilizing Tempress StylePanels, this helm seat goes beyond the standard snap on upholstery common in the market today. The contoured StylePanels create a comfortable seating surface that is ergonomically correct without the excessive use of foam. Built it lumbar support and a rolled front edge make this seat perfect for any boat seat application where comfort, durability, and superior style are desired. Like all Tempress seats, this helm seat is constructed of materials designed to withstand harsh marine environments.

The Tempress Elite High Back Helm Seat has a 5" x 12" bolt pattern and is designed to be mounted on a fore & aft slide for proper support. There are eight bolt holes under the seat of which the center four create a 5" square. This seat can be mounted on a standard square swivel, however it will need a reinforcement plate (sold separately) to use in combination with the swivel to comply with warranty standards.

Features:

• Rotationally molded helm seat
• StylePanel system ensures superior comfort
• Designed to withstand harsh marine environments
• Contoured and ergonomic seating surface
• Built in lumbar support
• Made in the USA
• 1 Year manufacturers warranty

Specifications:

• Dimensions: 26" H x 23.5" W x 27.5" D
• Weight: 23 lbs.

WARNING - Mounting Information: Tempress Elite Helm Seats should be mounted to a fore/aft slide 5" x 12" pedestal. If mounting to a 5" x 5" pedestal, you MUST also use the Tempress 57005 Reinforcement Plate. The 5" x 5" pedestal alone does not provide enough stability/surface coverage to properly support the seat and if mounted directly will void the warranty. View the Tempress Elite Helm Seat Warning Here. 

 Click Here to View the Tempress Elite Helm Seat Installation Instructions

Frequently Asked Questions

What is the Tempress Elite High Back Helm Seat designed for?

The Tempress Elite High Back Helm Seat is designed for boat helm seating and features a contoured, ergonomic seating surface, built-in lumbar support, and a rolled front edge. It is constructed from materials designed to withstand harsh marine environments.

What mounting pattern does the Tempress Elite High Back Helm Seat use?

The Tempress Elite High Back Helm Seat has a 5" x 12" bolt pattern and is designed to mount on a fore and aft slide for proper support. It also has eight bolt holes underneath, with the center four forming a 5" square pattern.

Can the Tempress Elite High Back Helm Seat be mounted to a 5" x 5" pedestal?

Yes, but a 5" x 5" pedestal requires the Tempress 57005 Reinforcement Plate for proper support and to comply with the seat's warranty standards. The 5" x 5" pedestal alone does not provide enough stability or surface coverage for direct mounting.

What is the StylePanel system on the Tempress Elite High Back Helm Seat?

The Tempress StylePanel system uses contoured panels to create an ergonomic seating surface without excessive foam. The system is designed to provide comfort while maintaining the seat's style and durability.

What are the dimensions of the Tempress Elite High Back Helm Seat?

The Tempress Elite High Back Helm Seat measures 26" high x 23.5" wide x 27.5" deep and weighs 23 lbs.

Is the Tempress Elite High Back Helm Seat made in the USA and covered by a warranty?

Yes. The Tempress Elite High Back Helm Seat is made in the USA and includes a 1-year manufacturer's warranty. Mounting requirements must be followed to maintain warranty compliance.

California Residents: WARNING Cancer and Reproductive Harm - P65Warnings.ca.gov