TRAC 40AD SeaSide Anchor Winch

TRAC 40AD SeaSide Anchor Winch

The TRAC 40AD SeaSide Anchor Winch is a durable winch featuring touch-and-release anchor deployment. The 40AD SeaSide winch is for boats up for 24' and can support anchor rode up to 40 lbs. With AutoDeploy, this winch will automatically stop when the anchor touches the bottom and gradually release more rope until the anchor will hold position. At any time, you can press the DOWN button to release more rope or press AutoDeploy again. Simply hold the UP button to retrieve the anchor.

Features:

• Includes wireless remote controller with mounting bracket
• Includes 90' x .25" nylon double braid anchor rope with 2,000 lb. break strength
• Includes installation instructions & hardware
• For anchor rodes up to 40 lbs.
• Sealed marine-grade 3-button switch on winch
• Marine-grade tinned 12-gauge 16' battery wire included
• Retrieve 90 feet of rope in about 80 seconds
• 12v Electric winch auto-resetting circuit breaker included
• Safety cable included
• Davit not included 
• 2 Year manufacturer warranty

Specifications:

• Suggested Boat Size: Up to 24'
• Rope Capacity: 5 mm x 100 ft  | 6 mm x 90 ft
• Max Rope Weight: 40 lbs.
• Rope Speed Up: 70 FPM
• Amp draw @ 12V: 10-12 amps
• Winch Dimensions: 18" L x 9" W x 6" H
• Deck Space Used: 18" x 9"

Frequently Asked Questions

What is the TRAC 40AD SeaSide Anchor Winch designed for?

The TRAC 40AD SeaSide Anchor Winch is designed for boats up to 24 feet and supports anchor rodes weighing up to 40 lbs. Its AutoDeploy function automatically stops when the anchor reaches the bottom and gradually releases additional rope until the anchor holds position.

How does AutoDeploy work on the TRAC 40AD SeaSide Anchor Winch?

When AutoDeploy is activated, the winch stops when the anchor touches the bottom. It then releases rope gradually until the anchor holds the boat in position. You can press the DOWN button to release more rope or activate AutoDeploy again at any time.

What rope is included with the TRAC 40AD SeaSide Anchor Winch?

The TRAC 40AD SeaSide Anchor Winch includes 90 feet of 1/4-inch nylon double-braid anchor rope with a 2,000 lb. break strength. The winch specifications also list capacity for 5mm x 100 ft or 6mm x 90 ft of rope.

How quickly does the TRAC 40AD SeaSide Anchor Winch retrieve the anchor rope?

The TRAC 40AD SeaSide Anchor Winch has an upward rope speed of 70 feet per minute. The product information states that it can retrieve 90 feet of rope in approximately 80 seconds.

What is included with the TRAC 40AD SeaSide Anchor Winch?

The winch includes a wireless remote controller with mounting bracket, 90 feet of nylon double-braid anchor rope, installation instructions and hardware, marine-grade tinned 12-gauge 16-foot battery wire, an auto-resetting circuit breaker, and a safety cable. A davit is not included.

What are the electrical requirements for the TRAC 40AD SeaSide Anchor Winch?

The TRAC 40AD SeaSide Anchor Winch is a 12V electric winch with a 10-12 amp draw at 12V. It includes marine-grade tinned 12-gauge 16-foot battery wire and a 12V auto-resetting circuit breaker.

California Residents: WARNING Cancer and Reproductive Harm - P65Warnings.ca.gov