|SKU||Container Size||Paint Color||Retail Price||Our Price||Savings|
|ILX-5690G||Gallon||Blue||$488.74||$247.18||You Save 49%|
|ILX-5690Q||Quart||Blue||$140.34||$72.97||You Save 48%|
|ILX-5691G||Gallon||Green||$488.74||$239.98||You Save 51%|
|ILX-5691Q||Quart||Green||$140.34||$72.97||You Save 48%|
|ILX-5692G||Gallon||Red||$488.74||$239.98||You Save 51%|
|ILX-5692Q||Quart||Red||$140.34||$72.97||You Save 48%|
|ILX-5693G||Gallon||Black||$488.74||$247.18||You Save 49%|
|ILX-5693Q||Quart||Black||$140.34||$72.97||You Save 48%|
|ILX-5694G||Gallon||Shark White||$488.74||$239.98||You Save 51%|
|ILX-5694Q||Quart||Shark White||$140.34||$72.97||You Save 48%|
|ILX-5695G||Gallon||Brown||$488.74||$239.98||You Save 51%|
|ILX-5695Q||Quart||Brown||$139.16||$72.36||You Save 48%|
|ILX-5696G||Gallon||Dark Blue||$488.74||$239.98||You Save 51%|
Interlux Micron Extra
A multi-season copolymer antifouling that wears down with use. Can be hauled and relaunched without repainting. Micron Extra uses Biolux technology to block slime and improve antifouling performance. ***WILL SHIP GROUND ONLY TO THE CONTIGUOUS 48 STATES ONLY***
- Controlled polishing-gets smoother with time maximizing fuel efficiency
- Biolux technology boots performance by controlling slime
- Excellent for use on all boats in all waters
|Manufacture Part Number||5690Q.1|
|Number of Seasons||Multi Season|
|Hull Material||Fiberglass, Steel, Wood|
Write Your Own Review
How to Apply
APPLICATION DATA METHOD: Airless Spray, Brush, Roller, Conventional Spray (Pressure Pot)
NUMBER OF COATS: 2-3 minimum
DRY FILM THICKNESS PER COAT: 2 mils (3.6 wet mils)
COVERAGE: 440 sq. ft/gal.
APPLICATION TEMP: 50° F. Min. / 95°F. Max.
THINNER: Special Thinner 216
|Temp||To Touch||To Recoat||To Launch|
|95°F||1 HR||16 HR||16 HR|
|73°F||2 HR||16 HR||16 HR|
|50°F||3 HR||16 HR||16 HR|
PREVIOUSLY PAINTED SURFACES: In Good Condition Remove loose paint by sanding with 80 grade (grit) paper, wipe with Special Thinner 216. In Poor Condition Remove antifouling paint in poor condition with Interstrip Semi-Paste 299E.
BARE FIBERGLASS: Begin by scrubbing well using soap and water and a stiff brush. Rinse with fresh water and allow to dry. Wipe a small area with a clean rag that has been wetted with Fiberglass Solvent Wash 202. While the surface is still wet, wipe with a clean, dry rag. Continue this process until the entire surface has been cleaned. Sand with 80 grade (grit) paper. Remove sanding residue. Wipe with Fiberglass Solvent Wash 202. If primer is needed, sand and apply Primocon YPA984.
BARE WOOD: Sand with 80 grade (grit) paper. Wipe with Brush-Ease 433. Apply first coat reduced 10% with Special Thinner 216. Fill seams, if necessary, with Seam Compound Brown 30.
STEEL HULLS: Contact Interlux® for further details.
DO NOT USE THIS PRODUCT ON ALUMINUM HULLS AND OUTDRIVES.
APPLICATION INFORMATION: At least 2 coats should be applied. Apply an extra stripe coat in areas of high wear such as chines, rudders, sterngear and any leading edges. Cleaner Painted Surfaces - Special Thinner 216. Bare Fiberglass - Fiberglass Solvent Wash 202. Bare Wood - BrushEase 433. Airless Spray Pressure: 170-204 bar/2500-3000 psi. Tip Size: 0.53 mm/21 thou. Conventional Spray Pressure Pot: Pressure: 3.44-4.47 bar/50-65 psi (gun pressure); 10-15 psi (pot pressure). Tip Size: 1.8-2.2 mm/70-85 thou. Other Spraying of antifouling paints is prohibited in Canada. For application of Micron Extra with Biolux to underwater metals such as stainless steel, cast iron, lead and bronze, see Interprotect® bulletin. Color will change on immersion, this will not affect antifouling performance. Some Important Points Colors may fade or change color at the waterline. Shark White may turn green above the true waterline. Product temperature should be minimum 10°C/50°F and maximum 29°C/85°F. Ambient temperature should be minimum 10°C/50°F. Surface must be dry and clean, and free from grease, detaching paint etc. Micron Extra with Biolux can be applied to most popular antifouling paints as long as the old coating has been aged, is tightly adhered and is in sound condition. Do not apply Micron Extra with Biolux over aluminum. Do not apply over tin-based copolymer antifouling paints.