Welcome to WholesaleMarine.com

CALL TOLL-FREE
M-F 9:00 AM - 6:00 PM EST
1-877-388-2628
My Cart (0)

Free Shipping Promo

Pettit Trinidad Slime Resistant Antifouling Bottom Paint

SKU # PET-1277G.1

Be the first to review this product

Availability: In Stock - Ships Today
Shipping Restrictions: Ground Only To Contiguous 48 States
Size Calculation
X Size Calculation
Color Chart
X Color Chart

* Required Fields

Starting At:

$166.17

Our Price $102.97

* Required Fields

SKU# PET-1277G.1

More Views

  • Color Chart
  • Size Calculation
Description
SKUContainer SizePaint ColorRetail PriceOur PriceSavings 
PET-1277GGallonBlue$499.82$272.97You Save 45%
PET-1277QQuartBlue$166.17$102.97You Save 38%
PET-1377GGallonGreen$499.82$272.97You Save 45%
PET-1377QQuartGreen$166.17$102.97You Save 38%
PET-1677GGallonRed$499.82$272.97You Save 45%
PET-1677QQuartRed$166.17$102.97You Save 38%
PET-1877GGallonBlack$499.82$272.97You Save 45%
PET-1877QQuartBlack$166.17$102.97You Save 38%

Pettit Trinidad Slime Resistant Dual Biocide Antifouling Marine Paint

Trinidad SR is the standard by which all bottom paints are measured. It remains the longest lasting, strongest antifouling paint available. Utilizing the dual biocide combination of a high copper load and slime resistant Irgarol, Trinidad SR provides unprecedented resistance to all fouling. Its hard protective coating has excellent adhesion, and withstands the toughest abuse. Left in the water, it will provide years of dependable service. So effective it earned Practical Sailor’s "Gear of the Year" honors twice.

***AVAILABLE ONLY FOR GROUND SHIPPING, WITHIN THE CONTINENTAL 48 STATES***

  • Dual Biocide with High Copper Load for Unprecedented Protection
  • Can be Burnished for a Smooth Racing Finish
  • Hard Durable Finish for Long Lasting Performance

 

 

Specifications
Manufacturer Pettit Paint
Manufacture Part Number 1277G.1
Number of Seasons Single Season
Hull Material Fiberglass, Steel, Wood
How To Apply

APPLICATION DATA METHOD: Brush, roller, airless or conventional spray.

NUMBER OF COATS: 2

DRY FILM THICKNESS PER COAT: 2 mils (3.5 wet mils)

COVERAGE: 400 sq. ft/gal.

APPLICATION TEMP: 40°F Min. / 90°F Max.

THINNER: 120 Brushing, 121 Spraying

DRY TIMES:
Temp To Recoat To Launch
90°F 3 HR 8 HR
70°F 6 HR 16 HR
50°F 12 HR 24 HR

PREVIOUSLY PAINTED SURFACES: If the previous coating is in good condition, thoroughly sand with 80 grit paper then solvent clean with 120 Brushing Thinner to remove residue. Apply two finish coats of Trinidad SR. If the previous coating is soft or in poor condition, remove to the bare surface by sanding or using Pettit 9051 Bio Blast Paint Remover. Proceed with appropriate bare system as described below. Old tin copolymers should be removed or sealed with Pettit 6627 Tie Coat Primer before applying Trinidad SR Antifouling.

BARE FIBERGLASS: All bare fiberglass, regardless of age, should be thoroughly cleaned with 92 Bio-Blue Hull Surface Prep or de-waxed several times with Pettit D-95 Dewaxer. Sand thoroughly with 80 grit sandpaper to a dull, frosty finish and rewash the sanded surface with 120 Brushing Thinner to remove sanding residue. Then apply two or three coats of Trinidad SR, following application instructions. Careful observation of the above instructions will help ensure long term adhesion of this and subsequent years’ antifouling paint. To eliminate the sanding operation, two methods are available: 1. Prep the surface with 92 Bio-Blue Hull Surface Prep or wash the fiberglass three times using Pettit 95 Dewaxer. Then apply one thin coat of Pettit 6998 Skip-Sand Primer or 6999 Sandless Primer. Use a 3/16” or less nap when applying by roller. Consult the primer label for complete application and antifouling top coating instructions. Apply two or three coats of Trinidad SR. 2. Clean, de-wax and etch the surface with 92 Bio-Blue Hull Surface Prep using a course Scotch-Brite pad in a swirling motion. Then apply one coat of Pettit 4700/4701 High Build Epoxy Primer. Consult the primer label for complete application and antifouling top coating instructions. Apply two or three coats of Trinidad SR. Barrier Coat: Fiberglass bottoms potentially can form osmotic blisters within the gelcoat and into the laminate. To render the bottom as water impermeable as possible, prepare the fiberglass surface as mentioned above (sanding method) then apply three coats of Pettit Protect 4700/4701 High Build Epoxy Primer or three coats of Pettit Protect 4100/4101 White High Build Epoxy Primer per label directions. Apply two or three finish coats of Trinidad SR.

BARRIER COAT: Fiberglass bottoms potentially can form osmotic blisters within the gelcoat and into the laminate. To render the bottom as water impermeable as possible, prepare the fiberglass surface as mentioned above (sanding method) then apply three coats of Pettit Protect 4700/4701 High Build Epoxy Primer or three coats of Pettit Protect 4100/4101 White High Build Epoxy Primer per label directions. Apply two or three finish coats of Trinidad SR.

BLISTERED FIBERGLASS: See Pettit Technical Bulletin TB-1000 Gelcoat Blister Repair and Prevention Specification for detailed instructions.

BARE WOOD: Sand entire surface with 80 grit paper; wash clean with 120 Brushing Thinner. Apply a coat of Trinidad SR thinned 25% with 120 Brushing Thinner, allow an overnight dry, lightly sand and wipe clean. Apply two finish coats of Trinidad SR.

BARE STEEL: Sandblast or disc sand to a clean, bright finish remove residue. Then either immediately apply two coats of 6980 Rustlok Steel Primer, allowing each to dry only 1-2 hours prior to over coating - OR - immediately apply one thin coat of 6455 Metal Primer and allow to dry two hours; follow with two coats of 6627 Tie Coat Primer, allowing each to dry two hours minimum. Apply two finish coats of Trinidad SR.

KEELS - LEAD: Abrade surface to bright metal; clean off residue. Apply one thin coat of 6455/044 Metal Primer; allow to dry two hours. Apply one coat of Pettit 6627 Tie Coat Primer then, if fairing is required, apply 7050 EZ-Fair Epoxy Fairing Compound. Follow with an additional coat of 6627 Tie Coat Primer per label directions. Apply two finish coats of Trinidad SR.

KEELS - STEEL OR CAST IRON: Abrade surface to bright metal; clean off residue. Apply one coat of 6980 Rustlok Steel Primer, allowing to dry only 1 - 2 hours prior to over coating. Then, if fairing is required, apply 7050 EZ-Fair Epoxy Fairing Compound followed by one coat of Pettit 6627 Tie Coat Primer, finish with two finish coats of Trinidad SR.

DO NOT USE THIS PRODUCT ON ALUMINUM HULLS AND OUTDRIVES.

Related Products