Marine Electronics

Lake Monroe, Indiana Fishing Map Fishing Hot Spots sets the standard for others to follow.  It's the map successful anglers have asked for by name for more than two decades.  Lake Monroe is Indiana's largest lake and produces more trophy largemouth...

Lake Okeechobee, Florida Fishing Map Fishing Hot Spots sets the standard for others to follow.  It's the map successful anglers have asked for by name for more than two decades. Lake Okeechobee is the second largest lake entirely within one state and...

Black Lake, New York Fishing Map Fishing Hot Spots sets the standard for others to follow.  It's the map successful anglers have asked for by name for more than two decades.  Black Lake is one of New York's best waters for largemouth bass. Shallow,...

102912" Gimbal MountFits into a boat's flush mount rod holder. Eliminates drilling holes and permanent mounting of downrigger brackets on boat. Made from welded stainless steel and modified nylon for the ultimate in strength and durability. For use with...

TM Transducer for DSI with TempDual frequency DSI Skimmer transducer 455/800kHz with built in temp. Includes 20ft cable, mounting bracket and hardware.Replacement DSI skimmer transducer.Works with: Elite-5 DSI, Elite-5x DSI, Mark-5x DSI...

GSD™ 24 Digital Black Box Network SounderThe GSD 24 features a vastly improved digital sonar design for superior target definition and deep-water performance.Get the Whole PictureWith up to 2,000 Watts of transmit power and a high-dynamic range...

B164 1kW Tilted Element 20° - 8-PinGarmin's bronze, thru-hull mount transducer with 20° tilt provides depth and temperature data. Garmin's transducer has an operating frequency of 50 or 200 kHz and mounts on a 16-24° deadrise angle...

B60 600W Tilted Element 12° - 8-PinThis entry-level tilted bronze transducer accommodates deadrise angles of 8 to 15 degrees without a fairing.An excellent choice for fiberglass and wood hulls, this 600W 8-pin transducer has a depth of 800' to...

B744V 600W Triducer 50/200kHz - 8-PinGarmin's bronze, thru-hull mount transducer with fairing provides depth, temperature and speed data. Garmin's transducer has an operating frequency of 50 or 200 kHz and mounts on a 0-24° deadrise angle.WARNING:...

Airmar P79 Adjustable 200/50kHz Plastic In-hull Transducer (8-pin)010-10327-20This entry level in-hull transducer with an adjustable deadrise angle makes installation a snap.The 8-pin 600 W transducer has a depth of 800 to 1,200 ft; an operating...

Airmar P319 200/50kHz Plastic Thru-hull Transducer (8-pin)010-10194-21This plastic thru-hull mount transducer performs well at high speeds.An excellent choice for fiberglass and metal hulls, this 8-pin 600 W transducer has a depth of 800 to 1,200 ft; an...

GRF™ 10 - Rudder Feedback SensorCompatible DevicesPair this sensor with the GHP 12™ to provide rudder position feedback and to detect and avoid rudder stops while sailing or boating.The GRF 10 uses a magnetic sensor to relay position...

HDI 83/200 455/800 Skimmer TransducerWorks w/ Elite-7 combo and fishfinder models, plus HDS Gen2 Touch fishfinder and combo modelsHDI Skimmer transducer 83/200/455/800kHz with built in temp. Includes mounting bracket and hardware. Cable Length 6m...

Tilted Element™ Thru-HullMinimize Your DragThe P19 model have been the standard in low-profile models for many years. Their large sensitive ceramics allow deep echosounding up to 206M (700'). These nearly flush units minimize drag as only 5mm...

P19 20 Degree Tilted Element™ Thru-Hull with 8 pin Connector for GarminMinimize Your DragThe P19 model have been the standard in low-profile models for many years. Their large sensitive ceramics allow deep echo sounding up to 206M (700')...

Airmar B175Hw/20° Tilt1kWFlush-mounted bronze housing protrudes less than 1/4" outside hull and can sit on trailer rollers/bunks without damage. Tilted element inside the transducer accommodates all hull deadrises and eliminates the need for a...

Airmar B175Lw/20° Tilt1kWFlush-mounted bronze housing protrudes less than 1/4" outside hull and can sit on trailer rollers/bunks without damage. Tilted element inside the transducer accommodates all hull deadrises and eliminates the need for a...

Airmar B150Mw/12° Tilt300WFlush-mounted bronze housing,tilted element inside the transducer accommodates all hull deadrises and eliminates the need for a fairing block. Low, medium, and high frequency versions provide maximum flexibility for the...

Airmar B150Mw/20° Tilt300WFlush-mounted bronze housing,tilted element inside the transducer accommodates all hull deadrises and eliminates the need for a fairing block. Low, medium, and high frequency versions provide maximum flexibility for the...

Airmar B75Hw/20° Tilt600WFlush-mounted bronze housing,tilted element inside the transducer accommodates all hull deadrises and eliminates the need for a fairing block. Low, medium, and high frequency versions provide maximum flexibility for the...