Fillers

Marine Tex Epoxy Putty Repair Kit - White Marine-Tex is a heavy-duty structural epoxy, used to repair aluminum, fiberglass and wooden boats, reinstall loose or stripped fasteners, permanently bond dissimilar metals without galvanic corrosion, and fill...

Choose Options

Gluvit Waterproof Epoxy Sealer Protecting your hulls and decks has never been easier with Gluvit Waterproof Epoxy Sealer. Made to protect fiberglass wood, aluminum, and steel it provides an extra barrier and protective coating. Wear and tear on boats...

Choose Options

Marine Tex Epoxy Putty Repair Kit - Gray Marine-Tex, the leading high-strength repair compound is designed to fill, bond and rebuild wood, fiberglass, ceramic, glass, metal, masonry and many plastics. Marine-Tex is manufactured to withstand the harsh...

Choose Options

BoatLife Git Rot Penetrating Epoxy Kit BoatLife Git Rot system is a superior product to combat dry rot because it works without having to remove dry rotted fibers. Unique two-part liquid Git Rot Epoxy saturates and restores original strength to wood by...

Choose Options

Interlux Watertite 2-Part Epoxy Marine Filler Compound Interlux Watertite is a quick drying 2-part epoxy filler suitable for use on Fiberglass, Metals, Epoxy and rigid Wood constructions. The formulation does not shrink and is extremely water resistant,...

Choose Options

ITW Rapid Set Marine Tex Epoxy Putty 2 oz Handles like putty, hardens like steel, sands like wood. Marine-Tex, the legendary high-strength repair compound designed for filling, bonding and rebuilding wood, fiberglass, ceramic, glass, metal, masonry and...

Add to Cart

Pettit EZ-Fair Two-Part Epoxy Fairing Compound EZ-Fair Epoxy Fairing Compound 7050 is a lightweight, two-part epoxy putty designed for filling and smoothing surface imperfections above and below the waterline. The special resins used in EZ-Fair impart a...

Choose Options

Permanent repair of fiberglass, wood, metal, stucco and drywall. High quality, white plastic filler for filling dents, scrapes and gouges. This product does not shrink after curing. A true "miracle mender" that won't crack or pop out. A long time...

Choose Options

West System 406 Colloidal Silica Adhesive Filler West System's 406 Colloidal Silica is used as an epoxy thickening additive with 105 Resin Epoxy. It helps the user control the viscosity and prevent epoxy runoff. Perfect for vertical and overhead joints...

Choose Options

Pettit EZ-Tex Marine Epoxy Repair Kit The Pettit EZ-Tex Epoxy Repair Kit is an easy to use marine epoxy repair compound for use where a high-strength, waterproof, and permanent repair is needed. This unique formula creates a tenacious bond to most...

Add to Cart

West System 404 High Density Filler This high density filler by West System is designed to act as an epoxy thickening agent. Created for maximum adhesion properties in hardware bonding where high-cyclic loads are anticipated. Also useful for filleting...

Choose Options

Starbrite Aluminum Epoxy Putty Stick Makes permanent and emergency repairs on aluminum boats, outdrives, fuel and water tanks and other aluminum parts. Starbrite Epoxy Putty Stuck forms a high-strength bond in minutes, even under water. No boat should...

Add to Cart

Hi-Bond Pour Foam Hi-Bond Pour Foam is a two-part liquid urethane closed cell foam. For use in hulls and cavities for flotation or insulation. Not affected by gas or oil. 2 Lb. per cubic foot density. Mix ratio is 1 to 1.   2 Quart kit makes 2...

Choose Options

Hawk Epoxy F2 Structural Adhesive Filler The Sea Hawk Hawk Epoxy F2 Structural Adhesive Filler is an easy to use adhesive designed to work with the Hawk Epoxy System. Ideal for bonding, gap filling, and filleting. When used the mixture allows for...

Add to Cart

West System 410 Microlight 410 Microlight is a low density filler that is ideal for making light and workable epoxy. THe compound is perfect for fairing large areas. Microlight mixes easier than other fillers or microballoons. Easier to sand after the...

Choose Options

Hawk Epoxy F6 MicroSphere Fairing Filler The Sea Hawk Hawk Epoxy F6 MicroSphere Fairing Filler is an easy to use adhesive designed to work with the Hawk Epoxy System. Ideal for small or large areas this lightweight fairing compound features a closed...

Add to Cart

Hawk Epoxy F1 High Load Adhesive Fiber Filler The Sea Hawk Hawk Epoxy F1 High Load Adhesive Fiber Filler is an easy to use adhesive designed to work with the Hawk Epoxy System. Ideal for bonding hardware and other applications with dissimilar materials...

Add to Cart

Hawk Epoxy F5 Light Density Fairing Filler The Sea Hawk Hawk Epoxy F5 Light Density Fairing Filler is an easy to use adhesive designed to work with the Hawk Epoxy System. Easy to sand and carve this fairing compound still remains strong and light...

Add to Cart

Pettit EZ-TEX Rapid Cure Epoxy Repair Pettit EZ-TEX Rapid Cure is an easy to use marine epoxy compound for use when a high-strength, waterproof, permanent repair is needed. Ideal for quick mechanical repairs dockside or at sea, this unique formula...

Add to Cart