TRAC Hand-Held Fluid / Oil Pump

TRAC Hand-Held Fluid / Marine Oil Change Pump

The TRAC Hand-Held Fluid / Marine Oil Change Pump is fantastic for oil changes and the removal of fuel, coolant and transmission fluid. It is also handy for pumping out bilge water and trapped fluids. This hand-held extractor allows you to pump most any fluid into your own container. It is an easier, cleaner way to drain engines with hard-to-reach drain plugs and is perfect for any situation where draining is difficult.

Features:

• Easy To Use
• Hand-Held Extractor
• Includes Cap, Adapters and Hoses
• Self-Priming
• Ideal For Nearly All Forms of Fluid Extraction

Hose Sizes:

• Black Extraction Tube:
• Outer Diameter - 0.34 (11/32)" 
• Length - 8'
• Clear Drain Tube:
• Inner Diameter - 0.50 (1/2)" 
• Length - 8'

Replaces old TRAC part # T10060

**Not for use with corrosive fluids, such as acids. 

Frequently Asked Questions

What is the TRAC Hand-Held Fluid / Marine Oil Change Pump used for?

The TRAC Hand-Held Fluid / Marine Oil Change Pump is designed for extracting oil, fuel, coolant, transmission fluid, bilge water, and other trapped fluids. It can help drain engines with hard-to-reach drain plugs and pump fluids into your own container.

What fluids can the TRAC Hand-Held Fluid / Marine Oil Change Pump extract?

The pump can be used for oil, fuel, coolant, transmission fluid, bilge water, and other fluids that require extraction. It is not intended for use with corrosive fluids such as acids.

Is the TRAC Marine Oil Change Pump self-priming?

Yes. The TRAC Hand-Held Fluid / Marine Oil Change Pump is a self-priming, hand-held extractor designed to make fluid removal easier, including from areas where draining is difficult.

What hoses and accessories are included with the TRAC Fluid Extractor?

The TRAC Fluid Extractor includes a cap, adapters, and hoses. The black extraction tube has an outer diameter of 0.34 inch (11/32 inch) and is 8 feet long. The clear drain tube has an inner diameter of 0.50 inch (1/2 inch) and is also 8 feet long.

Can the TRAC Hand-Held Fluid Pump be used for engine oil changes?

Yes. The TRAC Hand-Held Fluid / Marine Oil Change Pump is designed for oil changes and can help remove engine oil when drain plugs are difficult to reach. The extracted fluid can be pumped into your own container.

What is the TRAC Hand-Held Fluid / Marine Oil Change Pump replacement part number?

The TRAC Hand-Held Fluid / Marine Oil Change Pump replaces the old TRAC part number T10060. Verify the application and hose requirements before ordering to ensure it is the correct replacement for your equipment.

California Residents: WARNING Cancer and Reproductive Harm - P65Warnings.ca.gov