How To Apply Interlux Micron Extra Application Data
The information provided here has been reproduced courtesy of Interlux Paint Company. Wholesale Marine reproduced this information 2/22/2008.
PRODUCT DESCRIPTION
A multi-season copolymer antifouling that is specifically formulated with cuprous oxide which controlls shell fouling and Biolux technology which helps prevent weed, slime and algae growth. Micron Extra with Biolux will wear away with use, eliminating build up of old spent coatings. This also means that the longevity of Micron Extra with Biolux is related to the number of coats applied.
* Biolux boosts performance by controlling slime
* Exceptional antifouling performance in all conditions
* Multi-season, self polishing, no build up
* For use on fiberglass, wood and primed underwater metals (except aluminum)PRODUCT INFORMATION
Colour Y5690-Blue, Y5691-Green, Y5692-Red, Y5693-Black, Y5694-Shark White, Y5695-Brown, Y5696-Dark Blue
Finish Matte
Specific Gravity 1.92
Volume Solids 61%
Typical Shelf Life 3 yrs
VOC (As Supplied) 400 g/lt
Unit Size 1 US Quart 1 US Gallon
DRYING/OVERCOATING INFORMATION
Drying
50F 73F 95F
Touch Dry [ISO] 3hrs 2hrs 1hrs
Immersion 16hrs 16hrs 16hrs
Overcoating
Substrate Temperature
50F 73F 95F
Overcoated By Min Max Min Max Min Max Min Max
Micron Extra with Biolux nbsp16hrs nbsp- nbsp16hrs nbsp- nbsp16hrs nbsp-
APPLICATION AND USE
Preparation PREVIOUSLY PAINTED SURFACES: In Good Condition Remove loose paint by sanding with 80 grade (grit) paper, wipe with Special Thinner 216. In Poor Condition Remove antifouling paint in poor condition with Interstrip Semi-Paste 299E.
BARE FIBERGLASS:
Begin by scrubbing well using soap and water and a stiff brush. Rinse with fresh water and allow to dry. Wipe a small area with a clean rag that has been wetted with Fiberglass Solvent Wash 202. While the surface is still wet, wipe with a clean, dry rag. Continue this process until the entire surface has been cleaned. Sand with 80 grade (grit) paper. Remove sanding residue. Wipe with Fiberglass Solvent Wash 202. If primer is needed, sand and apply Primocon YPA984.
BARE WOOD: Sand with 80 grade (grit) paper. Wipe with Brush-Ease 433. Apply first coat reduced 10% with Special Thinner 216. Fill seams, if necessary, with Seam Compound Brown 30.
STEEL: Contact Interlux for further details.
Method
At least 2 coats should be applied. Apply an extra stripe coat in areas of high wear such as chines, rudders, sterngear and any leading edges.
Hints Thinner Bare Wood - Special Thinner 216. Spray - Special Thinner 216.
Cleaner Painted Surfaces - Special Thinner 216. Bare Fiberglass - Fiberglass Solvent Wash 202. Bare Wood - Brush-Ease 433.
Airless Spray Pressure: 170-204 bar/2500-3000 psi. Tip Size: 0.53 mm/21 thou.
Conventional Spray Pressure Pot: Pressure: 3.44-4.47 bar/50-65 psi (gun pressure); 10-15 psi (pot pressure). Tip Size: 1.8-2.2 mm/70-85 thou.
Other Spraying of antifouling paints is prohibited in Canada. For application of Micron Extra with Biolux to underwater metals such as stainless steel, cast iron, lead and bronze, see Interprotect bulletin. Color will change on immersion, this will not affect antifouling performance.
Some Important Points Colors may fade or change color at the waterline. Shark White may turn green above the true waterline. Product temperature should be minimum 10C/50F and maximum 29C/85F. Ambient temperature should be minimum 10C/50F and maximum 35C/95F. Substrate temperature should be minimum 10C/50F and maximum 35C/95F.
Compatibility/Substrates Surface must be dry and clean, and free from grease, detaching paint etc. Micron Extra with Biolux can be applied to most popular antifouling paints as long as the old coating has been aged, is tightly adhered and is in sound condition. Do not apply Micron Extra with Biolux over aluminum. Do not apply over tin-based copolymer antifouling paints.
Number of Coats 2-3 minimum Bare Wood: 3 coats (first thinned)
Coverage (Theoretical) - 440 (ft/Gal) by brush
Recommended DFT 2.0 mils dry
Recommended WFT 3.5 mils wet
Application Methods Brush, Roller, Airless Spray, Conventional Spray (Pressure Pot)
TRANSPORTATION,STORAGE AND SAFETY INFORMATION
TRANSPORTATION:
Micron Extra with Biolux should be kept in securely closed containers during transport and storage.
STORAGE:
Exposure to air and extremes of temperature should be avoided. For the full shelf life of Micron Extra with Biolux to be realised ensure that between use the container is firmly closed and the temperature is between 5C/40F and 35C/95F. Keep out of direct sunlight.
Safety DISPOSAL:
Container Disposal: Triple Rinse (or equivalent). Then offer for recycling or reconditioning, or puncture and dispose of in a sanitary landfill or by other procedures approved by state or local authorities. Pesticide Disposal: Open dumping is prohibited. Pesticide, spray mixture or rinsate that cannot be used or chemically reprocessed should be disposed of according to procedures approved by Federal, state, or local disposal authorities. GENERAL: Read the label safety section for Health and Safety Information, also available from our Technical Help Line.
Contains biocides. Antifoulings should only be wet sanded. Never dry sand or burn-off old antifoulings. Spraying of antifouling paints is prohibited in Canada.
IMPORTANT NOTES
The performance of any marine paint or coating depends on many factors outside the control of International Paint Inc., including surface preparation, proper application, and environmental conditions. Therefore, International Paint Inc. cannot guarantee this product’s suitability for your particular purpose or application. IMPLIED WARRANTIES OF FITNESS FOR A PARTICULAR PURPOSE AND/OR MERCHANTABILITY ARE EXCEEDED. International Paint Inc. SHALL NOT, UNDER ANY CIRCUMSTANCES, BE LIABLE FOR INCIDENTAL OR CONSEQUENTIAL DAMAGES. By purchase of this product, the buyer agrees that the sole exclusive remedy, if any, is limited to the refund of the purchase price or replacement of the product at International Paint Inc. option.
Interlux and International are registered trademarks of Akzo Nobel.