Bennett Auto Trim Pro - Hydraulic Systems
An all-in-one trim tab control system combining a myriad of essential features: Automatic Trim Tab Control, Manual Trim Tab Control, and Trim Tab Position Indication; all combined into an easy-use, space-saving keypad. It’s like cruise control for your tabs AutoTrim Pro automatically levels the pitch and roll of your boat, adjusting your trim tabs to changes in vessel speed, sea conditions and shifting weight. You can take full manual control anytime with the touch of a button.
This affordable solution can be added to most existing trim tab systems – electric or hydraulic. It’s fully compatible with all Bennett systems, and most others. Installation is simple and straightforward.
Auto Trim Tab Control
Easily store 2 favorite automatic running attitudes in memory. See real-time AutoTrim Pro adjustments with LED indication
Manual Tab Control with Automatic Override
Just push anywhere on the bow up or down buttons and you’re in full manual command of the trim tabs
OEM Customizable Response Time
Configure response time to engine power, hull type, actuator type or trim tab size
Trim Tab Position Indication
L.E.D. indicators equipped with adjustable light intensity
One-touch Manual Full Up and Full Down Buttons
Down for hole-shot, up for running in a following sea, or coming into the beach
Automatic Tab Retraction
Retract trim tabs to full up position when the boat’s ignition is switched off, protecting tabs during storage and trailering
Doug Wulf from Bennett Marine demonstrates the simple one-time process required for the AutoTrim Pro automatic trim tab control system.
Bennett Marine...Doug Wulf from Bennett Marine demonstrates the simple one-time...