Description
Pettit Captain's Ultra Clear Varnish- Quart
Captains Ultra Clear Varnish 2067 is a premium urethane varnish specially formulated for maximum durability and ease of application. The strong ultraviolet inhibitors in Captains Ultra Clear help it maintain outstanding gloss long after ordinary varnishes have faded. Ultra Clear's tough surface provides remarkable resistance against scratching and chipping. It's easy brushability, excellent leveling capabilities, and fast build-up are among its many attributes that make it a pleasure to apply.
Features:
- Traditional warm, amber color
- Provides outstanding gloss retention
- Extra U.V. Protection
- Extremely Durable Finish
- Perfect for cabin soles and decking.
- Easy to Apply
When applying to bare wood, a minimum of four (4) coats is required, and when applying over existing varnish, a minimum of two (2) coats is required. Pettit Captain's Ultra Clear Varnish should be applied in thin coats of no more than 3 wet-mils. Coats should be allowed to dry overnight before sanding or recoating.
Associated Products
- Pettit Brush Thinner - For brushing and clean up
- Pettit Spray Thinner - Spraying Application
Specifications:
- Resin: Alkyd/Phenolic
- Oil: Linseed/Tung
- Coverage: 585 sq. ft/gal.
- Number of Coats: Bare Wood: 4 minimum | Existing Varnish: 2 minimum
How to Apply
HOW TO APPLY PETTIT CAPTAIN’S ULTRA CLEAR VARNISH
Application Method: Brush, Roller or Spray
Number of Coats: Bare Wood: 4 minimum | Existing Varnish: 2 minimum
Application Temp: 40°F Minimum | 90°F Maximum
Thinners: 120 Brushing Thinner | 121 Spraying Thinner
Coverage: 585 sq. ft. /gal.
Temperature | Set-to-Touch | Tack Free | Dry Hard |
90°F | 1-3 hrs | 3-5 hrs | 8-12 hrs |
70°F | 2-4 hrs | 5-7hrs | 12-20 hrs |
50°F | 4-8 hrs | 12-16 hrs | 24/48 hrs |
SURFACE PREPARATION AND APPLICATION:
Bare Wood
- Sand surface completely smooth with 180-320 grit production paper. Wipe surface to remove sanding residue with a tack rag or rag dampened with Pettit 120 Brushing Thinner.
- For new work on open grained wood such as mahogany, oak, ash, ect. The use of Pettit or Z-Spar Paste Wood Filler Stain is required to achieve a smooth finish. Let dry overnight.
- For new work on close grained woods such as pine, maple, spruce, ect. The use of Pettit or Z-Spar Paste Wood Filler Stain is not normally required.
- Apply a generous covering coat of Pettit 2018 EZ WoodSealer and let it dry overnight. Sand thoroughly with 220 grit sandpaper.
- On especially rough or porous wood, a second coat of 2018 EZ WoodSealer may be applied. If applied, sand the second coat as well and wipe the surface clean with a tack rag or rag dampened with Pettit 120 Brushing Thinner.
- Apply at least 4 coats of Pettit Captain’s Ultra Clear Varnish. Let each coat dry overnight, sand with 220 grit sandpaper, and clean off sanding residue with a tack rag before applying the next coat.
- Sand the next to last coat with 400 grit production paper and clean off sanding residue before applying the final coat.
Varnished Wood
In Good Condition
- Wipe old varnish with Pettit 120 Brushing Thinner to be sure all dirt, polish and/or grease has been removed.
- Thoroughly sand the existing varnish with 180-220 grit production paper and wipe clean.
- Apply at least 2 coats of Pettit Captain’s Ultra Clear Varnish. Let the first coat dry overnight, sand with 400 grit sandpaper, clean off sanding residue then apply the final coat.
In Poor Condition
- Remove all the old varnish with a paint and varnish remover, or by sanding.
- Bleach the wood if necessary to remove water stains.
- Proceed with the system for bare wood shown above.
Bare Teak (or other oily woods)
- Sand the wood smooth with 120 grit production paper to open up the grain. Wipe the surface thoroughly with Pettit 120 Brushing Thinner in order to remove as much oil as possible.
- Apply a generous coat of Pettit 2018 EZ WoodSealer. Allow to dry overnight, then lightly sand the surface with 220 grit sandpaper and wipe it with a rag dampened with Pettit 120 Brushing Thinner.
- Apply at least 4 coats of Pettit Captain’s Ultra Clear Varnish. Let each coat dry overnight, sand with 220 grit sandpaper, and clean off sanding residue with a tack rag before applying the next coat.
- Sand the next to last coat with 400 grit production paper and clean off sanding residue before applying the final coat.
APPLICATION:
- Do not shake varnish. Stir well.
Information sourced from Pettit Technical Bulletin Varnishing 101
California Residents: WARNING Cancer and Reproductive Harm - P65Warnings.ca.gov
PRODUCT REVIEWS
QUESTIONS & ANSWERS
Other Details
- Google Product Type:
- Varnish
- Wiser:
- Yes
- Finish:
- High Gloss
- Product MPN:
- 2067Q
- Product UPC:
- 725469003606