Bennett 18" x 9" BOLT Electric Trim Tab Kit

Bennett BOLT189 18" x 9" BOLT Electric Trim Tab Kit

Bennett Marine has been leading the way in electric trim tabs since 1960 and is trusted by the leading boat builders for over half a century. Founded on the principles of quality and service Bennett electric trim tab systems are some of the best on the market today.

The Bennett Bolt trim tabs have been designed to outperform and outlast any other trim tab system on the market. The Bolt system uses states of the art technology and cutting-edge advances to manufacture a superior system. Common in outdated technology, the Bennett BOLT electric trim tab sets have developed technology that reduces water intrusion and common part malfunctions.

Bennett electric trim tab systems are designed for flatboats, center console, dual console, deck boats, bowriders, bass boats, and runabouts and are more suitable for single actuator use and for trailered boats 20 to 23 feet. When selecting the right size Bennett BOLT trim tab system, keep in mind the span is the side-to-side measurement and the chord is the fore-to-aft measurement.

NOTE: Bennett Electric Trim Tab sizes are in format span x chord. Span is the side to side measurement, chord is the fore to aft measurement.

Trim Tab Dimensions:

• Width: 18"
• Depth: 9"

Features:

• Wires are threaded through the upper hinge so no wires are exposed to the marine environment. This adds protection and safety.
• Water-tight black nylon actuator offers trouble-free operation.
• Main seal has been placed high to protect against marine growth and water intrusion failures.
• Runs quieter than competitors’ products.
• Installation is fast- the actuator does not require disassembly.
• Lifetime warranty for electric actuators
• Solidly constructed for a long service lifespan
• Bennett Part#: BOLT189
• Yamaha Part#: 6BT-50013-49-00

What's Included:

• (2) BEA2000 12-volt trim tab actuators
• (2) Stainless steel trim planes and mounting plates.
• (2) 20 ft harnesses with waterproof connectors.
• 6ft. wire harnesses and waterproof connectors.

SWITCH SOLD SEPARATELY

Click here to download Bennett BOLT189 18" x 9" BOLT Electric Trim Tab Kit Installation Instructions

Frequently Asked Questions

What is the Bennett BOLT189 Electric Trim Tab Kit designed for?

The Bennett BOLT189 Electric Trim Tab Kit is designed to help improve boat ride quality, handling, and performance. It is well suited for flatboats, center consoles, dual consoles, deck boats, bowriders, bass boats, and runabouts, and is recommended for trailered boats from 20 to 23 feet.

What is included with the Bennett BOLT189 trim tab kit?

This kit includes two BEA2000 12-volt trim tab actuators, two stainless steel trim planes and mounting plates, two 20’ harnesses with waterproof connectors, and 6’ wire harnesses with waterproof connectors.

Is a trim tab switch included with this kit?

No. The Bennett BOLT189 trim tab kit is sold without a switch, and the switch is sold separately.

What features help protect the Bennett BOLT system in marine environments?

The Bennett BOLT system routes wires through the upper hinge so they are not exposed to the marine environment. It also features a water-tight black nylon actuator and a main seal positioned high to help protect against marine growth and water intrusion.

What size are the trim tabs in the Bennett BOLT189 kit?

The trim tabs in this kit measure 18" wide by 9" deep. Bennett trim tab sizing is listed as span by chord, where span is the side-to-side measurement and chord is the fore-to-aft measurement.

California Residents: WARNING Cancer and Reproductive Harm - P65Warnings.ca.gov