Attwood Folding Anti-Glare Boat Navigation Light

Attwood Folding Anti-Glare Boat Navigation Light

Attwood Folding Anti-Glare Boat Navigation Light
SKU:
ATT-5358-P12-7
$50.49
$38.99
$11.50
Availability:
In Stock - Ships Today
Ships next business day if ordered in the next:

Frequently Bought Together

Attwood Folding All-Round Anti-Glare Boat Navigation Light

This Attwood Folding Anti-Glare Boat Navigation Light is built to last in the harsh marine environments with its non-corrosive materials and glass-filled polymer bases. It features a fold-down base that allows the light to swing 180° and can be mounted on both horizontal and vertical mounts. All of the wiring is concealed and protected within the pivoting base. In extreme conditions, if a 12ft./lb. force hits the base, the cam lock releases and allows base to swing down, reducing the chance of breakage to the base or pole. With a two mile, 360° light visibility, this anti-glare boat navigation light is for use on boats up to 39.4 ft.

Features:

  • Fold-Down Base That Allows The Light To Swing 180°
  • All Wiring Is Concealed and Protected Within The Pivoting Base
  • Has Two Mile, 360° Visibility
  • For Use On Boats Up To 39.4 ft.
  • Comes With A 12" Black Plastic Pole
  • Built To Last In Harsh Marine Environments
  • Can Be Mounted On Both Horizontal and Vertical Mounts
  • Non-Corrosive Materials
  • Glass-Filled Polymer Base
  • Includes a 9-Watt Wedge Base Lamp
  • Includes Mounts

Specifications:

  • Visibility: Two Mile, 360° Visibility

Installation Instructions

HOW TO INSTALL ATTWOOD FOLDING ALL-ROUND ANTI-GLARE LIGHT

Installation

  • Choose a position near the transom that is accessible to wiring and has clearance below deck.
  • Place base on the gunwale or deck. At desired location, be sure there I room to rotate the cover. Mark position for the 1-3/8” socket hole.
  • Remove base and drill the 1-3/8” diameter socket hole, being careful not to crack the gel coat finish around the hole.
  • Fit base into socket hole so it is parallel to boat centerline. Mark position and drill the three screw holes.
  • Remove base and connect wires through socket hole. Connect one wire to the battery ground (-). Attach other wire to the 1-amp fused, positive (+) switched wire from the navigation light switch.
  • Apply sealant between deck and light base. Fasten base with three #10 stainless steel screws. Do not overtighten screws.

Replacing Light Poles without a Locking Collar

  • Align pole screw with slot in the existing base. Insert pole into base.
  • Press down firmly to engage electrical connectors.
  • To remove pole, pull straight up.

Replacing Light Poles with Locking Collar

  • Align pole screw with slot in the base. Insert pole into base.
  • Press down firmly to engage electrical connectors.
  • Slide locking collar down to base, rotate until you can insert lower ring inside top of base.
  • Press collar down into base and rotate until it tightens between pole and base.
  • To remove light, rotate locking collar in opposite direction until it loosens, then pull up on pole.

Removing Locking Collar

  • For bases that do not accept locking collar, remove screw at bottom of pole. Slide locking collar off end of pole.
  • Replace screw in the upper screw hole.

Replacing Bulb

  • Unscrew frosted globe counter-clockwise and remove.
  • Pull bulb straight up. Replace with #906 9-Watt Wedge Base Replacement Bulb.
  • Screw lens clockwise onto pole.

Clean the light with a mild soap and warm water solution. Never use solvents or abrasives that may damage the lens or housing of the light. 

California Residents: warning sign WARNING Cancer and Reproductive Harm - P65Warnings.ca.gov

Other Details

Google Product Type:
Lights
Wiser:
Yes
Product MPN:
5358-P12-7
Product UPC:
022697535078

Product Reviews

Questions & Answers