Welcome to WholesaleMarine.com

Call Toll-Free: M-F 9AM - 6PM EST

Keel Guard Self Adhesive Polymer Keelguard 6' Long

SKU: MKI-102A6.1
Availability: In Stock - Ships Today
Order within and your order ships today! Details

Availability: In stock

Starting At $149.95


* Required Fields

* Required Fields

Keel Guard
Recent Customer Feedback


SKUColorRetail PriceOur PriceSavings 
MKI-102BL6Blue$179.94$149.95You Save 17%
MKI-102LG6Grey$179.94$149.95You Save 17%
MKI-102Y6Yellow$179.94$149.95You Save 17%

Protect your boats hull from scuffs and scrapes with this brand new 6' wide keel guard. The KeelGuard is a composite Polycor PVC based extrusion with special plasticizers and UV inhibitors. This material has been tested by independent laboratories and 3M

  • Protect against abrasive sand, rocks, concrete ramps and oyster beds
  • Eliminate costly repairs
  • Enjoy the highest quality and superior engineering
  • Increase the value of your boat

Wear and damage to your boat’s keel can break down its protective gelcoat finish, allowing water to reach and destroy the fiberglass laminates.

The Megaware KeelGuard® is a very simple product to install; however, the following instructions must be strictly followed. Any short cuts or missed steps will jeopardize and compromise the full bonding capabilities of the 3M® adhesive. For best results the KeelGuard should be installed at an ambient temperature of 60º or above. Typically, the Megaware KeelGuard® is mounted 4 to 6 inches above the waterline on the bow, ending 2 to 3 feet or more beyond the lowest point of the Keel. If protection is required above the Boweye, a separate Bow Guard is available in 1ft to 3ft lengths. For watercraft*, begin the KeelGuard approximately 1 inch below the bow hook, running the length of the keel, and ending 4 to 6 inches forward of the pump intake.

KeelGuard Size Boat Length
4 ft up to 14 ft
5 ft up to 16 ft
6 ft up to 18 ft
7 ft up to 20 ft
8 ft up to 22 ft
9 ft up to 24 ft
10 ft up to 26 ft
11 ft up to 28 ft
12 ft up to 30 ft

Product Specifications

Manufacturer Keel Guard
Manufacture Part Number 102A6.1


Write Your Own Review

You're reviewing: Keel Guard Self Adhesive Polymer Keelguard 6' Long

    1 star
    2 stars
    3 stars
    4 stars
    5 stars

* Required Fields

You May Also Like